Home/Opel/GT/Opel GT II (2007-2009)/Repair manual/Power Steering System/Checking and Adding Power Steering Fluid
Contents Section: Power Steering System All sections

Checking and Adding Power Steering Fluid Opel GT II

Checking and Adding Power Steering Fluid

  1. Clean the area surrounding the reservoir cap.
  2. Remove the reservoir cap.
  3. Inspect the power steering pump fluid level at regular intervals. Use the appropriate procedure below.
  4. If the fluid level is low, add power steering fluid to the proper level.
  5. Install the reservoir cap.
  6. When checking the fluid level after servicing the steering system, bleed the air from the system. Refer to Power Steering System Bleeding .