Water Pump, Remove and Install
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Drain coolant.
Toothed belt - see operation 'Toothed Belt, Replace'.
| Toothed belt tension roller (1) from oil pump. | |||
|---|---|---|---|
| .P. E3627.tif | 9 | 7,5 | tiff;; |
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
| Water pump (1) from cylinder block. | |||
| .P. E5132.tif | 9 | 7,5 | tiff;; |
| .D. ICON05.tif | 0,75 | 0,75 | tiff;; Clean |
Sealing surfaces.
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Before installing water pump, coat sealing surface (1) with Silicon Grease 19 70 206 (90 167 353).
Water pump with new seal ring to cylinder block.
| .D. ICON09.tif | 0,75 | 0,75 | tiff;; Tighten (Torque) |
|---|---|---|---|
| Water pump fixing bolts - 25 Nm / 18 lbf ft. | |||
| .P. E5133.tif | 9 | 7,5 | tiff;; |
| .D. ICON11.tif | 0,75 | 0,75 | tiff;; Important! |
| Lug (1) on water pump must align with counterpart (2) on cylinder block. | |||
| .P. E5134.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Toothed belt tension roller (1) - see operation 'Toothed Belt Tension Roller, Replace'.
| Toothed belt - see operation 'Toothed Belt, Replace'. | |||
|---|---|---|---|
| .P. E3627.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
| Top up cooling system - see operations 'Cooling System, Top up and Bleed' and 'Cooling System, Check for Leaks'. | |||
| .P. U8115.tif | 9 | 7,5 | tiff;; |