ABS 415 F0: DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 25 | RETURN PUMP CMD | Ignition ON |
Note:
| In diagnostic mode (diagnostic tester connected), ABS control does not function, i.e. the diagnostic tester display should never display ACTIVE for this parameter, except when running the corresponding actuator test. | INACTIVE 12V | - | - |
|---|---|---|---|
| Notes on Trouble-shooting: | Nominal Value: | Cause of fault: |
(If value is out of nominal range)
Test corresponding actuator:
| F5:ACTUATOR TEST RET. PUMP RELAY | VALVE RELAY FDBK |
|---|---|
| VALVE RELAY CMD | · U4.8 Control Unit ABS defective |