Remove
- 1. Raise vehicle
- 2. Remove rear mud flap • Unscrew 3x bolts (1) • Remove expanding rivet (2) • Carefully separate adhesive seam (arrow) with plastic spatula • Remove mud flap
Note. Be careful not to damage the paintwork!
Install
- 3. Clean area to be bonded on wing • Remove remaining glue
- 4. Insert rear spacer in mud flap • Insert 3x spacers on inside of screw-fit surface (arrows) of mud flap
- 5. Remove protective film on adhesive strip of new rear mud flap
- 6. Install rear mud flap • Align mud flap and place in position • Press on mud flap in area of adhesive • Install expanding rivet • Tighten 3x bolts
- 7. Lower vehicle