Remove
- 1. Raise vehicle
- 2. Remove front mud flap • Remove 4x body-bound rivet (1) • Carefully separate adhesive seam (arrow) with plastic spatula • Remove mud flap (2)
Note. Be careful not to damage the paintwork!
Install
- 3. Clean area to be bonded on wing • Remove remaining glue
- 4. Remove protective film on adhesive strip of new mud flap
- 5. Install front mud flap • Align mud flap and place in position • Press on mud flap in area of adhesive • Install 4x body-bound rivets
- 6. Lower vehicle