Replace Engine Control Unit, Lpg (Euro 4) Opel Corsa D

Warning: Observe safety regulations for gas-driven vehicles (natural gas / Liquefied Petroleum Gas LPG)

Remove

1. 1. Open bonnet
2. 2. Disconnect battery • Detach earth connection
3. 3. Separate wiring harness plug from engine control unit, liquid gas • Release wiring loom fixing (1) • Disconnect wiring harness plug (2)

4. 4. Detach engine control unit, liquid gas, from bracket • Unscrew 2x bolts with nuts

Install

5. 5. Attach engine control unit, liquid gas, to bracket • Tighten 2x bolts with nuts

Note. Replace stop nuts

6. 6. Connect wiring harness plug with engine control unit, liquid gas • Connect wiring harness plug • Latch wiring harness plug
7. 7. Connect battery • Attach earth connection
8. 8. Program volatile memories
9. 9. Close bonnet