- 1. Remove glove compartment
- 2. Disconnect wiring harness plug of auxiliary heating button • Expose wiring harness plug (1) • Unlatch and disconnect wiring harness plug
- 3. Remove auxiliary heating button with wiring harness • Cut 3x cable ties (arrows) • Unscrew knurled nut (2) • Unlatch and disconnect 3x wiring harness plug (4) from housing • Remove auxiliary heating button (3)
Note. Use a suitable release tool and note the coding.
- 4. Install auxiliary heating button with wiring harness • Insert button • Tighten knurled nut • Engage 3x wiring harness in wiring harness plug • Attach 3x cable ties
Note. Note the coding.
- 5. Connect wiring harness plug of auxiliary heating button • Attach noise insulation strap to wiring harness
- 6. Install glove compartment
- 7. Function check