Front Object Alarm Sensor Replace (Antara) Opel Antara I

Front Object Alarm Sensor Replace (Antara)

Remove

1. Disconnect the negative battery cable.
2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replace (Antara) .
3. Disconnect the connector of the front object alarm sensor.
4. Remove the front object alarm sensor from the front bumper fascia by pulling the sensor with opened key holders.

Install

1. Install the front object sensor on the front bumper fascia by pushing the sensor. Make sure that the keys are placed in the proper position.
2. Connect the connector of the front object alarm sensor.
3. Install the front bumper fascia. Refer to Front Bumper Fascia Replace (Antara) .
4. Connect the negative battery cable.