Speed Sensitive Power Steering (Ssps) Control Module Replace Opel Antara I

Speed Sensitive Power Steering (SSPS) Control Module Replace

Remove

1. Disconnect negative battery cable.
2. Remove the driver knee bolster. Refer to Driver Knee Bolster Replace .
3. Disconnect the connector of SSPS control module.
4. Remove the SSPS control module from the bracket by sliding the control module upward.

5. Remove the bracket by removing the bolts, if needed.

Install

1. Install the control module bracket with bolts.

Tighten

Tighten the SSPS control module bracket bolts to 10 N•m (7 lb-ft).

2. Install the SSPS control module on the bracket.
3. Connect the connector of SSPS control module.
4. Install the driver knee bolster. Refer to Driver Knee Bolster Replace .
5. Connect the negative battery cable.