Object Alarm Control Module Replace (Antara) Opel Antara I

Object Alarm Control Module Replace (Antara)

Remove

1. Disconnect the negative battery cable.
2. Remove the wheelhouse trim panel. Refer to Rear Wheelhouse Trim Panel Replace (Antara) .
3. Disconnect the connector of alarm control module.
4. Remove the nuts and object alarm control module.

Install

1. Install the object alarm control module with nuts.

Tighten

Tighten the object alarm control module nuts to 8 N•m (71 lb-in).

2. Connect the connector of alarm control module.
3. Install the wheelhouse trim panel. Refer to Rear Wheelhouse Trim Panel Replace (Antara) .
4. Connect the negative battery cable.