Water Outlet Port Replace Opel Antara I



Water Outlet Port Replace

Remove

1. Loosen the clamp and disconnect the heater upper hose.
2. Loosen the clamp and disconnect the water hose to surge tank.

3. Remove the water outlet port from the cylinder block.
4. Remove water outlet port to cylinder block gasket and discard.

Install

1. Install a new water outlet port to cylinder block gasket.
2. Install the water outlet port to the cylinder block.

Tighten

Tighten the water outlet port attaching bolt to 10 N•m (89 lb-in).

3. Connect the heater upper hose to the water outlet port and secure the clamp.
4. Connect the water hose to surge tank to the water outlet port and secure the clamp.