Home/Nissan/Titan/Nissan Titan I (2003-2006)/Repair manual/Automatic Trans/Automatic Transmission: Specifications
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission: Specifications Nissan Titan I

Automatic Trans 6 illustrations

Torque Converter Clutch Solenoid

  1. The solenoid is switched "OFF" to release the lock-up.

GENERAL SPECIFICATIONS

Applied model4x24x4
Automatic transmission modelRE5R05A
Transmission model code number95X1395X16
Stall torque ratio2.0:1
Transmission gear ratio1st3.827
2nd2.368
3rd1.519
4th1.000
5th0.834
Reverse2.613
Recommended fluidNISSAN Matic Fluid J*1
Fluid capacity10.6 liter (11-1/4 US qt, 9-3/8 Imp qt)

General Specifications

CAUTIONUse only Genuine NISSAN ATF Matic Fluid J. Do not mix with other fluid. Using automatic transmission fluid other than Genuine NISSAN an ATF Matic Fluid J will deteriorate in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the warranty.

Scheme 17

Scheme 17: NORMAL MODE

Note. At half throttle, the accelerator opening is 4/8 of the full opening.

Scheme 18

Scheme 18: TOW MODE

Note. At half throttle, the accelerator opening is 4/8 of the full opening.

Scheme 19

Scheme 19: VEHICLE SPEED WHEN PERFORMING AND RELEASING COMPLETE LOCK-UP

Note. At closed throttle, the accelerator opening is less than 1/8 condition. At half throttle, the accelerator opening is 4/8 of the full opening.

Scheme 20

Scheme 20: VEHICLE SPEED WHEN PERFORMING AND RELEASING SLIP LOCK-UP

Note. At closed throttle, the accelerator opening is less than 1/8 condition.

Scheme 21

Scheme 21: STALL SPEED

Scheme 22

Scheme 22: LINE PRESSURE