Glasses, Window System & Mirrors: Overhaul — Glasses, Window System & Mirrors — Windows

Glasses, Window System & Mirrors: Overhaul Nissan Sentra B16 рестайлинг

Windows 9 illustrations ~325 words

REGULATOR ASSEMBLY

Removal

Scheme 69

Scheme 70

Remove the front door finisher. Refer to " «REMOVAL AND INSTALLATION»(ref-367309-S42319798962010072700000) ".
Disconnect the front door speaker electrical connector.
Position aside the vapor barrier.
If equipped, reconnect the power window switch connector. Operate the power window main switch to raise/lower the door window until the door glass bolts can be seen.
Remove the door glass bolts.
Raise the door glass and hold with a suction lifter (A).
If equipped, disconnect the power window switch connector from the regulator assembly.
Remove the regulator bolts and regulator assembly. If equipped remove bolt (A)

Inspection after Removal

Check the regulator assembly for the following. If a problem is detected, grease or replace it as shown in illustration.

Scheme 71

Scheme 72

Grease application points for each sliding part
Wire wear
Regulator deformation

Installation

Installation is in the reverse order of removal.

POWER WINDOW REGULATOR ASSEMBLY

Disassembly

Remove the power window motor from the regulator assembly.

Assembly

Assembly is in the reverse order of disassembly.

Scheme 73

Scheme 73: Removal and Installation