Maintenance: NVH Nissan Rogue II

APPEARANCE AND NOISE

1. Check the propeller shaft tube surface for dents or cracks. If malfunction is detected, replace propeller shaft assembly.
2. If center bearing is noisy or damaged, replace propeller shaft assembly.

VIBRATION

If vibration is present at high speed, adjust the propeller shaft phase first.

1. Check the propeller shaft for bend and damage. If damaged, replace propeller shaft assembly.
2. Perform a cruise test drive to check the propeller shaft for runout. If vibration occurs, separate propeller shaft at electric controlled coupling of final drive; then change the phase between electric controlled coupling stud bolt and propeller shaft by the one bolt hole at a time and install propeller shaft.
3. If vibration is still detected, measure propeller shaft runout after removing it. Refer to " «INSPECTION»(ref-616751-S17775030722014051900000) ".