MAINT Switch (Maintenance Switch)
- When "MAINT" switch is pressed, vehicle information screen displays. Display indicates engine oil, tire rotation, and tire pressure.
- Pressing "MAINT" switch once cycles display from engine oil->tire rotation ->engine oil.
Engine Oil and Tire Rotation Interval
Scheme 176
- Operating the joystick left/right, service interval distance can be set.
- When journey distance is the same as service interval distance, alert is displayed. (SERVICE ALERT setting is ON.)
- Selected service interval distance is 0 - 7,500 miles (0 - 12,000 km) in increments of 250 miles (400 km).
- Press and hold "TRIP RESET" or "MAINT" switch for 1.5 seconds or longer, to reset present journey distance.
- Settings cannot be changed during driving.
TRIP, FUEL ECON and MAINTENANCE Screens are Not Shown
- CHECK IGNITION SIGNAL Check ignition signal. Refer to «IGNITION SIGNAL CHECK FOR DISPLAY CONTROL UNIT»(ref-233678-S26512990582006052600000) . OK or NG OK: GO TO 2 . NG: Check the malfunctioning parts.
- CHECK POWER SUPPLY AND GROUND CIRCUIT Check power supply circuit for display unit. Refer to «POWER SUPPLY AND GROUND CIRCUIT CHECK FOR DISPLAY CONTROL UNIT»(ref-233678-S21046007882006052600000) . OK or NG OK: GO TO 3 . NG: Check the malfunctioning parts.
- CHECK COMMUNICATION LINE Check display communication line. Refer to «DISPLAY COMMUNICATION LINE CHECK (BETWEEN DISPLAY CONTROL UNIT AND DISPLAY UNIT)»(ref-233678-S33214334022006052600000) . OK or NG OK: Replace display unit. Refer to «REMOVAL AND INSTALLATION OF DISPLAY UNIT»(ref-233678-S27242068252006052600000) . NG: Check the malfunctioning parts.