Lan System: Wiring Nissan Juke I

Precautions for Harness Repair

1. Solder the repaired area and wrap tape around the soldered area. NOTE: A fray of twisted lines must be within 110 mm (4.33 in).
2. Bypass connection is never allowed at the repaired area. NOTE: Bypass connection may cause CAN communication error. The spliced wire becomes separated and the characteristics of twisted line are lost.
3. Replace the applicable harness as an assembly if error is detected on the shield lines of CAN communication line.

Scheme 14

Scheme 15

Wiring Diagram

For connector terminal arrangements, harness layouts, and alphabets in a "diamond shape" symbol (option abbreviation; if not described in wiring diagram), refer to " CONNECTOR INFORMATION ".

Scheme 16