MANUAL OPERATION
Note. For wiring diagrams, see WIRING DIAGRAMS .
AUTO OPERATION
Note. For wiring diagrams, see WIRING DIAGRAMS .
The power window "AUTO" feature enables the driver to lower the driver window without holding the switch in the "DOWN" position.
The "AUTO" feature is activated by pressing the switch beyond the "DOWN" position to the "AUTO" position.
The "AUTO" feature only operates on the downward movement of the driver window.
The window can be stopped before it is fully open by pressing the window switch to the "UP" position.
RETAINED POWER OPERATION (WITH POWER DOOR LOCKS)
Note. For wiring diagrams, see WIRING DIAGRAMS .
When the ignition switch is turned to "OFF" position from "ON" or "START" position, power is supplied for 45 seconds to power window relay terminal No. 2, from SECU terminal No. 46.
Ground is supplied to power window relay terminal No. 1, through body grounds M14 (located behind left kick panel) and M68 (located behind right kick panel).
When power and ground are supplied, the power window relay continues to be energized, and the power window can be operated.
The retained power operation is cancelled when the driver or passenger side door is opened.
POWER WINDOW OPENED/CLOSED OPERATION WITH KEY CYLINDER
Note. For wiring diagrams, see WIRING DIAGRAMS .
When ignition key switch is "OFF", front power window can be opened or closed by turning the left front door key cylinder to "UNLOCK/LOCK" position. Power window can be opened as the door key cylinder is kept fully turned to the "UNLOCK" position. Power window can be closed as the door key cylinder is kept fully turned to the "LOCK" position.
The power window opening stops while performing open/close of the window, power window is stopped at the position that the door key cylinder is placed on Neutral. When the ignition switch is turned "ON" while the power window opening is operated.