GENERATOR SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| 2.4L | |||
| Generator Model | LR170-757B, HITACHI | ||
| Nominal Rating | 12 Volts, 70 Amps | ||
| Ground Polarity | Negative | ||
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 1000 RPM | ||
| Hot Output Current (With 13.5 Volts Applied) | |||
| At 1300 RPM | 17 Amps | ||
| At 2500 RPM | 54 Amps | ||
| At 5000 RPM | 72 Amps | ||
| Regulated Output Voltage | 14.1-14.7 Volts | ||
| Minimum Brush Length | .236 in. (6.00 mm) | ||
| Brush Spring Pressure | 3.60-8.82 ozs. (1.000-2.452 N) | ||
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | ||
| Rotor (Field Coil) Resistance | 2.6 Ohms | ||
| 3.3L | |||
| Generator Model | LR180-756B, HITACHI | ||
| Nominal Rating | 12 Volts, 80 Amps | ||
| Ground Polarity | Negative | ||
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 1000 RPM | ||
| Hot Output Current (With 13.5 Volts Applied) | |||
| At 1300 RPM | 23 Amps | ||
| At 2500 RPM | 65 Amps | ||
| At 5000 RPM | 77 Amps | ||
| Regulated Output Voltage | 14.1-14.7 Volts | ||
| Minimum Brush Length | .236 in. (6.00 mm) | ||
| Brush Spring Pressure | 3.60-8.82 ozs. (1.000-2.452 N) | ||
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | ||
| Rotor (Field Coil) Resistance | 2.7 Ohms | ||
GENERATOR SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Generator Mounting Bolt | |||
| 2.4L | |||
| Lower Bolt | 32-38 (43-52) | ||
| Upper Bolt | 12-14 (16-19) | ||
| 3.3L | |||
| Lower Bolt | 12-14 (16-19) | ||
| Upper Bolt | 16-22 (22-30) | ||
| Generator Pulley Nut | 36-47 (49-64) | ||
TORQUE SPECIFICATIONS