Contents Section: Windows All sections

Power Window Control System: Application Nissan Armada I рестайлинг

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with BCM.

Diagnosis modeFunction Description
WORK SUPPORTChanges the setting for each system function.
SELF-DIAG RESULTSDisplays the diagnosis results judged by BCM. Refer to " DTC INDEX ".
CAN DIAG SUPPORT MNTRMonitors the reception status of CAN communication viewed from BCM.
DATA MONITORThe BCM input/output signals are displayed.
ACTIVE TESTThe signals used to activate each device are forcibly supplied from BCM.
ECU IDENTIFICATIONThe BCM part number is displayed.
CONFIGURATIONEnables to read and save the vehicle specification. Enables to write the vehicle specification when replacing BCM.

CONSULT-III FUNCTION CHART

SYSTEM APPLICATION

BCM can perform the following functions for each system.

Note. It can perform the diagnosis modes except the following for all sub system selection items.

SystemSub system selection itemDiagnosis mode
WORK SUPPORTDATA MONITORACTIVE TEST
BCMBCMX
Door lockDOOR LOCKXXX
Rear window defoggerREAR DEFOGGERXX
Warning chimeBUZZERXX
Interior room lamp timerINT LAMPXXX
Remote keyless entry systemMULTI REMOTE ENTXXX
Exterior lampHEAD LAMPXXX
Wiper and washerWIPERXXX
Turn signal and hazard warning lampsFLASHERXX
Air conditionerAIR CONDITONERX
Intelligent Key system (1)INTELLIGENT KEYX
Combination switchCOMB SWX
ImmobilizerIMMUXX
Interior room lamp battery saverBATTERY SAVERXXX
Back door openTRUNKXX
RAP (retained accessory power)RETAINED PWRXXX
Signal buffer systemSIGNAL BUFFERXX
TPMS (tire pressure monitoring system)AIR PRESSURE MONITORXXX
Vehicle security systemTHEFT ALMXXX
Panic alarm systemPANIC ALARMX
(1) With Intelligent Key
(1)With Intelligent Key

SYSTEM APPLICATION CHART