Contents Section: Exterior/interior Trim All sections

Roof: Application Nissan Armada I facelift

APPLICATION ITEM

CONSULT-III performs the following functions via CAN communication with BCM.

Direct Diagnostic ModeDescription
ECU IdentificationThe BCM part number is displayed.
Self Diagnostic ResultThe BCM self diagnostic results are displayed.
Data MonitorThe BCM input/output data is displayed in real time.
Active TestThe BCM activates outputs to test components.
Work supportThe settings for BCM functions can be changed.
Configuration* The vehicle specification can be read and saved. * The vehicle specification can be written when replacing BCM.
CAN Diag Support MntrThe result of transmit/receive diagnosis of CAN communication is displayed.

DIAGNOSIS MODE CHART

SYSTEM APPLICATION

BCM can perform the following functions for each system.

Note. It can perform the diagnosis modes except the following for all sub system selection items.

SystemSub SystemDirect Diagnostic Mode
ECU IdentificationSelf Diagnostic ResultData MonitorActive TestWork supportConfigurationCAN Diag Support Mntr
Door lockREAR DEFOGGER DOOR LOCKXX
Warning chimeBUZZERXX
Interior room lamp timerINT LAMPXXX
Remote keyless entry systemMULTI REMOTE ENTXXX
Exterior lampHEADLAMPXXX
Wiper and washerWIPERXXX
Turn signal and hazard warning lampsFLASHERXX
Air conditionerAIR CONDITIONERXX
Intelligent Key systemINTELLIGENT KEYX
Combination switchCOMB SWX
BCMBCMXXXXX
ImmobilizerIMMUXXX
Interior room lamp battery saverBATTERY SAVERXXX
Back door openTRUNKXX
Vehicle security systemTHEFT ALARMXXX
RAP systemRETAINED PWRXXX
Signal buffer systemSIGNAL BUFFERXX
TPMSAIR PRESSURE MONITORXXXX
Panic alarm systemPANIC ALARMX

DIAGNOSIS MODE CHART