FOR NORTH AMERICA : Special Service Tool
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
SPECIAL SERVICE TOOL DESCRIPTION Tool number (Kent-Moore No.) Tool name Description KV10115801 (J-38956) Oil filter wrench Removing and installing oil filter 64.3 mm (2.531 in)
FOR NORTH AMERICA : Commercial Service Tool
COMMERCIAL SERVICE TOOL DESCRIPTION Tool name Description Power tool Loosening nuts and bolts Spark plug wrench Removing and installing spark plug 14 mm (0.55 in)
Scheme 51
EXCEPT FOR NORTH AMERICA : Special Service Tool
SPECIAL SERVICE TOOL DESCRIPTION Tool number Tool name Description KV10115801 Oil filter wrench Removing and installing oil filter 64.3 mm (2.531 in)
EXCEPT FOR NORTH AMERICA : Commercial Service Tool
COMMERCIAL SERVICE TOOL DESCRIPTION Tool name Description Power tool Loosening nuts and bolts Radiator cap tester Checking radiator and radiator cap Radiator cap tester adapter Adapting radiator cap tester to radiator cap and radiator filler neck 28 (1.10) dia. 31.4 (1.236) dia. 41.3 (1.626) dia. Unit: mm (in) Spark plug wrench Removing and installing spark plug
Scheme 52
Scheme 53
General maintenance includes those items which should be checked during the normal day-to-day operation of the vehicle. They are essential if the vehicle is to continue operating properly. The owners can perform checks and inspections themselves or have their NISSAN dealers do them.
OUTSIDE THE VEHICLE
The maintenance items listed here should be performed from time to time, unless otherwise specified.
| Item | Reference Information | |
|---|---|---|
| Tires | Check the pressure with a gauge often and always prior to long distance trips. Adjust the pressure in all tires, including the spare, to the pressure specified. Check carefully for damage, cuts or excessive wear. | SERVICE DATA AND SPECIFICATIONS (SDS) |
| Wheel nuts | When checking the tires, make sure no nuts are missing, and check for any loose nuts. Tighten if necessary. | |
| Tire rotation | Tires cannot be rotated, as front tires are different size from rear tires and the direction of wheel rotation is fixed in each tire. | WHEELS (BONDING WEIGHT TYPE) |
| Tire Pressure Monitoring System (TPMS) transmitter components | Replace the TPMS transmitter grommet seal, valve core and cap when the tires are replaced due to wear or age. | TRANSMITTER |
| Wheel alignment and balance | If the vehicle should pull to either side while driving on a straight and level road, or if you detect uneven or abnormal tire wear, there may be a need for wheel alignment. If the steering wheel or seat vibrates at normal highway speeds, wheel balancing may be needed. | WHEEL ALIGNMENT WHEEL ALIGNMENT WHEELS (BONDING WEIGHT TYPE) |
| Windshield | Clean the windshield on a regular basis. Check the windshield at least every six months for cracks or other damage. Repair as necessary. | |
| Windshield wiper blades | Check for cracks or wear if they do not wipe properly. | |
| Doors and engine hood | Check that all doors and the engine hood operate properly. Also make sure that all latches lock securely. Lubricate if necessary. Make sure that the secondary latch keeps the hood from opening when the primary latch is released. When driving in areas using road salt or other corrosive materials, check for lubrication frequently. | LOCKS, HINGES AND HOOD LATCH |
| Lamps | Make sure that the headlamps, stop lamps, tail lamps, turn signal lamps, and other lamps are all operating properly and installed securely. Also check headlamp aim. Clean the headlamps on a regular basis. | |
ITEM REFERENCE
INSIDE THE VEHICLE
The maintenance items listed here should be checked on a regular basis, such as when performing periodic maintenance, cleaning the vehicle, etc.
| Item | Reference Information | |
|---|---|---|
| Warning lamps and chimes | Make sure that all warning lamps and chimes are operating properly. | |
| Windshield wiper and washer | Check that the wipers and washer operate properly and that the wipers do not streak. | |
| Windshield defroster | Check that the air comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. | |
| Steering wheel | Check that it has the specified play. Be sure to check for changes in the steering condition, such as excessive play, hard steering or strange noises. Free play: Less than 35 mm (1.38 in) | |
| Seats | Check seat position controls such as seat adjusters, seatback recliner, etc. to make sure they operate smoothly and that all latches lock securely in every position. Check that the head restrains move up and down smoothly and that the locks (if equipped) hold securely in all latched positions. Check that the latches lock securely for folding-down rear seatbacks. | |
| Seat belts | Check that all parts of the seat belt system (e.g. buckles, anchors, adjusters and retractors) operate properly and smoothly and are installed securely. Check the belt webbing for cuts, fraying, wear or damage. | SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS |
| Accelerator pedal | Check the pedal for smooth operation and make sure the pedal does not catch or require uneven effort. Keep the floor mats away from the pedal. | |
| Brakes | Check that the brake does not pull the vehicle to one side when applied. | |
| Brake pedal and booster | Check the lever or pedal for smooth operation and make sure it has the proper distance under it when depressed fully. Check the brake booster function. Be sure to keep the floor mats away from the pedal. | PERIODIC MAINTENANCE BRAKE BOOSTER |
| Clutch pedal | Make sure the pedal operates smoothly and check that it has the proper free play. | PERIODIC MAINTENANCE |
| Parking brake | Check that the lever has the proper travel and make sure that the vehicle is held securely on a fairly steep hill when only the parking brake is applied. | PERIODIC MAINTENANCE |
| Automatic transmission "Park" mechanism | Check that the lock release button on the selector lever operates properly and smoothly. On a fairly steep hill check that the vehicle is held securely with the selector lever in the P (Park) position without applying any brakes. | |
ITEM REFERENCE
UNDER THE HOOD AND VEHICLE
The maintenance items listed here should be checked periodically (e.g. each time you check the engine oil or refuel).
| Item | Reference Information | |
|---|---|---|
| Windshield washer fluid | Check that there is adequate fluid in the tank. | |
| Engine coolant level | Check the coolant level when the engine is cold. | ENGINE COOLANT |
| Radiator and hoses | Check the front of the radiator and clean off any dirt, insects, leaves, etc., that may have accumulated. Make sure the hoses have no cracks, deformation, deterioration or loose connections. | |
| Brake and clutch fluid level | Make sure that the brake and clutch fluid levels are between the "MAX" and "MIN" lines on the reservoir. | BRAKE FLUID LEVEL AND LEAKS CLUTCH FLUID |
| Battery | Check the fluid level in each cell. It should be between the "MAX" and "MIN" lines. Vehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. | BASIC INSPECTION |
| Engine drive belt | Make sure that no belt is frayed, worn, cracked or oily. | DRIVE BELT |
| Engine oil level | Check the level on the oil level gauge after parking the vehicle on a level spot and turning off the engine. | PERIODIC MAINTENANCE |
| Power steering fluid level and lines | Check the level on the dipstick with the engine off. Check the lines for improper attachment, leaks, cracks, etc. | POWER STEERING FLUID AND LINES |
| Exhaust system | Make sure there are no loose supports, cracks or holes. If the sound of the exhaust seems unusual or there is a smell of exhaust fumes, immediately locate the trouble and correct it. | EXHAUST SYSTEM |
| Underbody | The underbody is frequently exposed to corrosive substances such as those used on icy roads or to control dust. It is very important to remove these substances, otherwise rust will form on the floor pan, frame, fuel lines and around the exhaust system. At the end of winter, the underbody should be thoroughly flushed with plain water, being careful to clean those areas where mud and dirt can easily accumulate. | |
| Fluid leaks | Check under the vehicle for fuel, oil, water or other fluid leaks after the vehicle has been parked for a while. Water dripping from the air conditioner after use is normal. If you should notice any leaks or gasoline fumes are evident, check for the cause and correct it immediately. | |
ITEM REFERENCE
General maintenance includes those items which should be checked during the normal day-to-day operation of the vehicle. They are essential if the vehicle is to continue operating properly. The owners can perform the checks and inspections themselves or they can have their NISSAN dealers do them.
OUTSIDE THE VEHICLE
The maintenance items listed here should be performed from time to time, unless otherwise specified.
| Item | Reference Information | |
|---|---|---|
| Tires | Check the pressure with a gauge often and always prior to long distance trips. Adjust the pressure in all tires, including the spare, to the pressure specified. Check carefully for damage, cuts or excessive wear. | SERVICE DATA AND SPECIFICATIONS (SDS) |
| Windshield wiper blades | Check for cracks or wear if not functioning correctly. | |
| Doors and engine hood | Check that all doors and the engine hood operate properly. Also make sure that all latches lock securely. Lubricate if necessary. Make sure that the secondary latch keeps the hood from opening when the primary latch is released. When driving in areas using road salt or other corrosive materials, check for lubrication frequently. | LOCKS, HINGES AND HOOD LATCH |
| Tire rotation | Tires cannot be rotated, as front tires are different size from rear tires and the direction of wheel rotation is fixed in each tire. | WHEELS (BONDING WEIGHT TYPE) |
| Tire Pressure Monitoring System (TPMS) transmitter components | Replace the TPMS transmitter grommet seal, valve core and cap when the tires are replaced due to wear or age. | TRANSMITTER |
ITEM REFERENCE
INSIDE THE VEHICLE
The maintenance items listed here should be checked on a regular basis, such as when performing periodic maintenance, cleaning the vehicle, etc.
| Item | Reference Information | |
|---|---|---|
| Lamps | Make sure that the headlamps, stop lamps, tail lamps, turn signal lamps, and other lamps are all operating properly and installed securely. Also check headlamp aim. | |
| Warning lamps and chimes | Make sure that all warning lamps and chimes are operating properly. | |
| Steering wheel | Check that it has the specified play. Check for changes in the steering conditions, such as excessive free play, hard steering or strange noises. Free play: Less than 35 mm (1.38 in) | |
| Seat belts | Check that all parts of the seat belt system (e.g. buckles, anchors, adjusters and retractors) operate properly and smoothly, and are installed securely. Check the belt webbing for cuts, fraying, wear or damage. | SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS |
ITEM REFERENCE
UNDER THE HOOD AND VEHICLE
The maintenance items listed here should be checked periodically (e.g. each time you check the engine oil or refuel).
| Item | Reference Information | |
|---|---|---|
| Windshield washer fluid | Check that there is adequate fluid in the tank. | |
| Engine coolant level | Check the coolant level when the engine is cold. | ENGINE COOLANT |
| Engine oil level | Check the level after parking the vehicle on a level ground and turning off the engine. | PERIODIC MAINTENANCE |
| Brake and clutch fluid levels | Make sure that the brake and clutch fluid levels are between the "MAX" and "MIN" lines on the reservoirs. | BRAKE FLUID LEVEL AND LEAKS CLUTCH FLUID |
| Battery | Check the fluid level in each cell. It should be between the "MAX" and "MIN" lines. | |
ITEM REFERENCE
Two different maintenance schedules are provided, and should be used, depending upon the conditions in which the vehicle is mainly operated. After 60,000 miles (96,000 km) or 48 months, continue the periodic maintenance at the same mileage/time intervals.
| Schedule 1 | Follow Periodic Maintenance Schedule 1 if the driving habits frequently include one or more of the following driving conditions: Repeated short trips of less than 5 miles (8 km). Repeated short trips of less than 10 miles (16 km) with outside temperatures remaining below freezing. Operating in hot weather in stop-and-go "rush hour" traffic. Extensive idling and/or low speed driving for long distances, such as police, taxi or door-to-door delivery use. Driving in dusty conditions. Driving on rough, muddy, or salt spread roads. Towing a trailer, using a camper or a car-top carrier. | Emission Control System Maintenance | EMISSION CONTROL SYSTEM MAINTENANCE |
|---|---|---|---|
| Chassis and Body Maintenance | |||
| Schedule 2 | Follow Periodic Maintenance Schedule 2 if none of driving conditions shown in Schedule 1 apply to the driving habits. | Emission Control System Maintenance | EMISSION CONTROL SYSTEM MAINTENANCE |
| Chassis and Body Maintenance |
PERIODIC MAINTENANCE CHART
| Abbreviations: R = Replace. I = Inspect. Correct or replace if necessary. []: At the mileage interval only | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | Reference Information or Content Title | ||||||||
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 3.75 (6) 3 | 7.50 (12) 6 | 11.25 (18) 9 | 15 (24) 12 | 18.75 (30) 15 | 22.5 (36) 18 | 26.25 (42) 21 | 30 (48) 24 | |
| Drive belt | (1) | DRIVE BELT | ||||||||
| Air cleaner filter | (2) | [R] | AIR CLEANER FILTER | |||||||
| EVAP vapor lines | I (7) | EVAP VAPOR LINES | ||||||||
| Fuel lines | I (7) | FUEL LINES | ||||||||
| Fuel filter | (3) | |||||||||
| Engine coolant (7) | (4) | ENGINE COOLANT | ||||||||
| Engine oil | R | R | R | R | R | R | R | R | ENGINE OIL | |
| Engine oil filter (Use genuine NISSAN engine oil filter or equivalent.) | R | R | R | R | R | R | R | R | OIL FILTER | |
| Spark plugs (Iridium-tipped type) | (5) | Replace every 105,000 miles (168,000 km). | SPARK PLUG | |||||||
| Intake & exhaust valve clearance (7) | (6) | CAMSHAFT VALVE CLEARANCE | ||||||||
| (1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months. Replace the drive belt if found damaged or if the auto belt tensioner reading reaches the maximum limit. (2) If operating mainly in dusty conditions, more frequent maintenance may be required. (3) Maintenance-free item. For service procedures, refer to FUEL SYSTEM . (4) First replacement interval is 105,000 miles (168,000 km) or 84 months. After first replacement, replace every 75,000 miles (120,000 km) or 60 months. Use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent with proper mixture ratio of 50% antifreeze and 50% demineralized or distilled water. Mixing any other type of coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. (5) Replace spark plug when the spark plug gap exceeds 1.4 mm (0.055 in) even if within specified periodic replacement mileage. (6) Periodic maintenance is not required. However, if valve noise increases, inspect valve clearance. (7) Maintenance items and intervals with "*" are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required. | ||||||||||
| (1) | After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months. Replace the drive belt if found damaged or if the auto belt tensioner reading reaches the maximum limit. |
| (2) | If operating mainly in dusty conditions, more frequent maintenance may be required. |
| (3) | Maintenance-free item. For service procedures, refer to FUEL SYSTEM . |
| (4) | First replacement interval is 105,000 miles (168,000 km) or 84 months. After first replacement, replace every 75,000 miles (120,000 km) or 60 months. Use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent with proper mixture ratio of 50% antifreeze and 50% demineralized or distilled water. Mixing any other type of coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. |
| (5) | Replace spark plug when the spark plug gap exceeds 1.4 mm (0.055 in) even if within specified periodic replacement mileage. |
| (6) | Periodic maintenance is not required. However, if valve noise increases, inspect valve clearance. |
| (7) | Maintenance items and intervals with "*" are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required. |
EMISSION CONTROL SYSTEM MAINTENANCE SCHEDULE
| Abbreviations: R = Replace. I = Inspect. Correct or replace if necessary. []: At the mileage interval only | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | Reference Information or Content Title | ||||||||
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 33.75 (54) 27 | 37.5 (60) 30 | 41.25 (66) 33 | 45 (72) 36 | 48.75 (78) 39 | 52.5 (84) 42 | 56.25 (90) 45 | 60 (96) 48 | |
| Drive belt | (1) | I (7) | DRIVE BELT | |||||||
| Air cleaner filter | (2) | [R] | AIR CLEANER FILTER | |||||||
| EVAP vapor lines | I (7) | EVAP VAPOR LINES | ||||||||
| Fuel lines | I (7) | FUEL LINES | ||||||||
| Fuel filter | (3) | |||||||||
| Engine coolant (7) | (4) | ENGINE COOLANT | ||||||||
| Engine oil | R | R | R | R | R | R | R | R | ENGINE OIL | |
| Engine oil filter (Use genuine NISSAN engine oil filter or equivalent.) | R | R | R | R | R | R | R | R | OIL FILTER | |
| Spark plugs (Iridium-tipped type) | (5) | Replace every 105,000 miles (168,000 km). | SPARK PLUG | |||||||
| Intake & exhaust valve clearance (7) | (6) | CAMSHAFT VALVE CLEARANCE | ||||||||
| (1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months. Replace the drive belt if found damaged or if the auto belt tensioner reading reaches the maximum limit. (2) If operating mainly in dusty conditions, more frequent maintenance may be required. (3) Maintenance-free item. For service procedures, refer to FUEL SYSTEM . (4) First replacement interval is 105,000 miles (168,000 km) or 84 months. After first replacement, replace every 75,000 miles (120,000 km) or 60 months. Use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent with proper mixture ratio of 50% antifreeze and 50% demineralized or distilled water. Mixing any other type of coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. (5) Replace spark plug when the spark plug gap exceeds 1.4 mm (0.055 in) even if within specified periodic replacement mileage. (6) Periodic maintenance is not required. However, if valve noise increases, inspect valve clearance. (7) Maintenance items and intervals with "*" are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required. | ||||||||||
| (1) | After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months. Replace the drive belt if found damaged or if the auto belt tensioner reading reaches the maximum limit. |
| (2) | If operating mainly in dusty conditions, more frequent maintenance may be required. |
| (3) | Maintenance-free item. For service procedures, refer to FUEL SYSTEM . |
| (4) | First replacement interval is 105,000 miles (168,000 km) or 84 months. After first replacement, replace every 75,000 miles (120,000 km) or 60 months. Use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent with proper mixture ratio of 50% antifreeze and 50% demineralized or distilled water. Mixing any other type of coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. |
| (5) | Replace spark plug when the spark plug gap exceeds 1.4 mm (0.055 in) even if within specified periodic replacement mileage. |
| (6) | Periodic maintenance is not required. However, if valve noise increases, inspect valve clearance. |
| (7) | Maintenance items and intervals with "*" are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required. |
MAINTENANCE OPERATION REFERENCE
| Abbreviations: R = Replace. I = Inspect. Correct or replace if necessary. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | Reference Information or Content Title | ||||||||
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 3.75 (6) 3 | 7.50 (12) 6 | 11.25 (18) 9 | 15 (24) 12 | 18.75 (30) 15 | 22.5 (36) 18 | 26.25 (42) 21 | 30 (48) 24 | |
| Brake lines & cables | I | I | BRAKE LINES AND CABLES | |||||||
| Brake pads & rotors | I | I | I | I | DISC BRAKE | |||||
| Brake fluid | R | R | BRAKE FLUID | |||||||
| Automatic transmission fluid | (3) | |||||||||
| Manual transmission gear oil & differential gear oil | (1) | I | I | GEAR OIL REAR DIFFERENTIAL GEAR OIL: R200 REAR DIFFERENTIAL GEAR OIL: R200V | ||||||
| Steering gear & linkage, axle & suspension parts | I | I | I | I | STEERING GEAR AND LINKAGE AXLE AND SUSPENSION PARTS | |||||
| Tire rotation | (2) | GENERAL MAINTENANCE WHEELS (BONDING WEIGHT TYPE) | ||||||||
| Exhaust system | I | I | I | I | EXHAUST SYSTEM | |||||
| In-cabin microfilter | R | R | IN-CABIN MICROFILTER | |||||||
| (1) Automatic transmission fluid is maintenance-free. (2) If towing a trailer, using a camper or a car-top carrier, or driving on rough or muddy roads, change (not just inspect) fluid/oil at every 30,000 miles (48,000 km) or 24 months. (3) Refer to "Tire rotation" under the " GENERAL MAINTENANCE " heading earlier in this Information. | ||||||||||
| (1) | Automatic transmission fluid is maintenance-free. |
| (2) | If towing a trailer, using a camper or a car-top carrier, or driving on rough or muddy roads, change (not just inspect) fluid/oil at every 30,000 miles (48,000 km) or 24 months. |
| (3) | Refer to "Tire rotation" under the " GENERAL MAINTENANCE " heading earlier in this Information. |
CHASSIS AND BODY MAINTENANCE
| Abbreviations: R = Replace. I = Inspect. Correct or replace if necessary. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | Reference Information or Content Title | ||||||||
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 33.75 (54) 27 | 37.5 (60) 30 | 41.25 (66) 33 | 45 (72) 36 | 48.75 (78) 39 | 52.5 (84) 42 | 56.25 (90) 45 | 60 (96) 48 | |
| Brake lines & cables | I | I | BRAKE LINES AND CABLES | |||||||
| Brake pads & rotors | I | I | I | I | DISC BRAKE | |||||
| Brake fluid | R | R | BRAKE FLUID | |||||||
| Automatic transmission fluid | (1) | |||||||||
| Manual transmission gear oil & differential gear oil | (2) | I | I | GEAR OIL REAR DIFFERENTIAL GEAR OIL: R200 REAR DIFFERENTIAL GEAR OIL: R200V | ||||||
| Steering gear & linkage, axle & suspension parts | I | I | I | I | STEERING GEAR AND LINKAGE AXLE AND SUSPENSION PARTS | |||||
| Tire rotation | (3) | GENERAL MAINTENANCE WHEELS (BONDING WEIGHT TYPE) | ||||||||
| Exhaust system | I | I | I | I | EXHAUST SYSTEM | |||||
| In-cabin microfilter | R | R | IN-CABIN MICROFILTER | |||||||
| (1) Automatic transmission fluid is maintenance-free. (2) If towing a trailer, using a camper or a car-top carrier, or driving on rough or muddy roads, change (not just inspect) fluid/oil at every 30,000 miles (48,000 km) or 24 months. (3) Refer to "Tire rotation" under the " GENERAL MAINTENANCE " heading earlier in this Information. | ||||||||||
| (1) | Automatic transmission fluid is maintenance-free. |
| (2) | If towing a trailer, using a camper or a car-top carrier, or driving on rough or muddy roads, change (not just inspect) fluid/oil at every 30,000 miles (48,000 km) or 24 months. |
| (3) | Refer to "Tire rotation" under the " GENERAL MAINTENANCE " heading earlier in this Information. |
ABBREVIATIONS
| Abbreviations: R = Replace. I = Inspect. Correct or replace if necessary. []: At the mileage interval only | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | Reference Information or Content Title | ||||||||
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 7.5 (12) 6 | 15 (24) 12 | 22.5 (36) 18 | 30 (48) 24 | 37.5 (60) 30 | 45 (72) 36 | 52.5 (84) 42 | 60 (96) 48 | |
| Drive belt | (1) | I (6) | DRIVE BELT | |||||||
| Air cleaner filter | [R] | [R] | AIR CLEANER FILTER | |||||||
| EVAP vapor lines | I (6) | I (6) | EVAP VAPOR LINES | |||||||
| Fuel lines | I (6) | I (6) | FUEL LINES | |||||||
| Fuel filter | (2) | |||||||||
| Engine coolant (6) | (3) | ENGINE COOLANT | ||||||||
| Engine oil | R | R | R | R | R | R | R | R | ENGINE OIL | |
| Engine oil filter (Use genuine NISSAN engine oil filter or equivalent.) | R | R | R | R | R | R | R | R | OIL FILTER | |
| Spark plugs (Iridium-tipped type) | (4) | Replace every 105,000 miles (168,000 km). | SPARK PLUG | |||||||
| Intake & exhaust valve clearance (6) | (5) | CAMSHAFT VALVE CLEARANCE | ||||||||
| (1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months. Replace the drive belt if found damaged or if the auto belt tensioner reading reaches the maximum limit. (2) Maintenance-free item. For service procedures, refer to FUEL SYSTEM . (3) First replacement interval is 105,000 miles (168,000 km) or 84 months. After first replacement, replace every 75,000 miles (120,000 km) or 60 months. Use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent with proper mixture ratio of 50% antifreeze and 50% demineralized or distilled water. Mixing any other type of coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. (4) Replace spark plug when the spark plug gap exceeds 1.4 mm (0.055 in) even if within specified periodic replacement mileage. (5) Periodic maintenance is not required. However, if valve noise increases, inspect valve clearance. (6) Maintenance items and intervals with "*" are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required. | ||||||||||
| (1) | After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months. Replace the drive belt if found damaged or if the auto belt tensioner reading reaches the maximum limit. |
| (2) | Maintenance-free item. For service procedures, refer to FUEL SYSTEM . |
| (3) | First replacement interval is 105,000 miles (168,000 km) or 84 months. After first replacement, replace every 75,000 miles (120,000 km) or 60 months. Use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent with proper mixture ratio of 50% antifreeze and 50% demineralized or distilled water. Mixing any other type of coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. |
| (4) | Replace spark plug when the spark plug gap exceeds 1.4 mm (0.055 in) even if within specified periodic replacement mileage. |
| (5) | Periodic maintenance is not required. However, if valve noise increases, inspect valve clearance. |
| (6) | Maintenance items and intervals with "*" are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required. |
EMISSION CONTROL SYSTEM MAINTENANCE SCHEDULE
| Abbreviations: R = Replace. I = Inspect. Correct or replace if necessary. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | Reference Information or Content Title | ||||||||
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 7.5 (12) 6 | 15 (24) 12 | 22.5 (36) 18 | 30 (48) 24 | 37.5 (60) 30 | 45 (72) 36 | 52.5 (84) 42 | 60 (96) 48 | |
| Brake lines & cables | I | I | I | I | BRAKE LINES AND CABLES | |||||
| Brake pads & rotors | I | I | I | I | DISC BRAKE | |||||
| Brake fluid | R | R | BRAKE FLUID | |||||||
| Automatic transmission fluid | (1) | |||||||||
| Manual transmission gear oil & differential gear oil | I | I | I | I | GEAR OIL REAR DIFFERENTIAL GEAR OIL: R200 REAR DIFFERENTIAL GEAR OIL: R200V | |||||
| Steering gear & linkage, axle & suspension parts | I | I | STEERING GEAR AND LINKAGE AXLE AND SUSPENSION PARTS | |||||||
| Tire rotation | (2) | GENERAL MAINTENANCE WHEELS (BONDING WEIGHT TYPE) | ||||||||
| Exhaust system | I | I | EXHAUST SYSTEM | |||||||
| In-cabin microfilter | R | R | R | R | IN-CABIN MICROFILTER | |||||
| (1) Automatic transmission fluid is maintenance-free. (2) Refer to "Tire rotation" under the " GENERAL MAINTENANCE " heading earlier in this Information. | ||||||||||
| (1) | Automatic transmission fluid is maintenance-free. |
| (2) | Refer to "Tire rotation" under the " GENERAL MAINTENANCE " heading earlier in this Information. |
CHASSIS AND BODY MAINTENANCE SCHEDULE
The following tables show the normal maintenance schedule. Depending upon weather and atmospheric conditions, varying road surfaces, individual driving habits and vehicle usage, additional or more frequent maintenance may be required.
Periodic maintenance beyond the last period shown on the tables requires similar maintenance.
| Abbreviations: I = Inspect and correct or replace as necessary, R = Replace, E = Check and correct the engine coolant mixture ratio. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | Reference Information | ||||||||
| Perform at a kilometers (miles) or month interval, whichever comes first. | Km x 1,000 (Miles x 1,000) Months | 10 (6) 6 | 20 (12) 12 | 30 (18) 18 | 40 (24) 24 | 50 (30) 30 | 60 (36) 36 | 70 (42) 42 | 80 (48) 48 | |
| Underhood and under vehicle | ||||||||||
| Intake & exhaust valve clearance | See (2) | CAMSHAFT VALVE CLEARANCE | ||||||||
| Drive belt | See (3) | I | I | DRIVE BELT | ||||||
| Engine oil (Use recommended oil.) (1) | R | R | R | R | R | R | R | R | ENGINE OIL | |
| Engine oil filter (Use genuine NISSAN engine oil filter or equivalent) (1) | R | R | R | R | R | R | R | R | OIL FILTER | |
| Engine coolant (Use Genuine NISSAN Engine Coolant or equivalent in its quality.) | See (4) | E | R | ENGINE COOLANT | ||||||
| Cooling system | I | I | ENGINE COOLANT RADIATOR CAP FUEL LINES | |||||||
| Fuel lines | I | I | FUEL LINES | |||||||
| Air cleaner filter (Viscous paper type) (1) | R | R | AIR CLEANER FILTER | |||||||
| Fuel filter (In-tank type) | See (5) | |||||||||
| Spark plugs (Iridium-tipped type) | See (6) | Replace every 100,000 km (60,000 miles) | SPARK PLUG | |||||||
| EVAP vapor lines (With carbon canister) | I | I | EVAP VAPOR LINES | |||||||
| (1) Maintenance items with "*" should be performed more frequently according to "Maintenance Under Severe Driving Conditions". (2) Periodic maintenance is not required. However, if valve noise increases, check valve clearance. (3) Replace the drive belts if found damaged or if the auto belt tensioner reading reaches the maximum limit. (4) Use Genuine NISSAN Engine Coolant or equivalent in its quality, in order to avoid possible aluminum corrosion within the engine cooling system caused by the use of non-genuine engine coolant. After first replacement, replace every 40,000 km (24,000 miles) or 24 months. (5) Maintenance-free item. (6) Replace spark plug when the spark plug gap exceeds 1.4 mm (0.055 in) even if within specified periodic replacement mileage. | ||||||||||
| (1) | Maintenance items with "*" should be performed more frequently according to "Maintenance Under Severe Driving Conditions". |
| (2) | Periodic maintenance is not required. However, if valve noise increases, check valve clearance. |
| (3) | Replace the drive belts if found damaged or if the auto belt tensioner reading reaches the maximum limit. |
| (4) | Use Genuine NISSAN Engine Coolant or equivalent in its quality, in order to avoid possible aluminum corrosion within the engine cooling system caused by the use of non-genuine engine coolant. After first replacement, replace every 40,000 km (24,000 miles) or 24 months. |
| (5) | Maintenance-free item. |
| (6) | Replace spark plug when the spark plug gap exceeds 1.4 mm (0.055 in) even if within specified periodic replacement mileage. |
ENGINE AND EMISSION CONTROL MAINTENANCE
| Abbreviations: I = Inspect and correct or replace as necessary, R = Replace, L = Lubricate. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | Referencenformation | ||||||||
| Perform at a kilometers (miles) or month interval, whichever comes first. | Km x 1,000 (Miles x 1,000) Months | 10 (6) 6 | 20 (12) 12 | 30 (18) 18 | 40 (24) 24 | 50 (30) 30 | 60 (36) 36 | 70 (42) 42 | 80 (48) 48 | |
| Underhood and under vehicle | ||||||||||
| Brake line & cables | I | I | I | I | BRAKE LINES AND CABLES | |||||
| Brake & clutch fluid (For level & leaks) | I | I | I | I | BRAKE FLUID LEVEL AND LEAKS CLUTCH FLUID | |||||
| Brake fluid (1) | R | R | BRAKE FLUID | |||||||
| Exhaust system | I | I | EXHAUST SYSTEM | |||||||
| Power steering fluid & lines (For level & leaks) | I | I | I | I | POWER STEERING FLUID AND LINES | |||||
| Clutch system | I | I | I | I | PERIODIC MAINTENANCE | |||||
| Automatic transmission fluid | See (2) | |||||||||
| Manual transmission gear oil (For level & leaks) | I | I | I | I | GEAR OIL | |||||
| Differential gear oil (For level & leaks) (1) | I | I | I | I | REAR DIFFERENTIAL GEAR OIL: R200 REAR DIFFERENTIAL GEAR OIL: R200V | |||||
| Steering gear & linkage, axle & suspension parts (1) | I | I | STEERING GEAR AND LINKAGE AXLE AND SUSPENSION PARTS | |||||||
| Outside and inside | ||||||||||
| Wheel alignment (If necessary, balance wheels) | I | I | I | I | WHEEL ALIGNMENT WHEEL ALIGNMENT WHEELS (BONDING WEIGHT TYPE) | |||||
| Brake pads, rotors, drums & linings (1) | I | I | I | I | FRONT DISC BRAKE REAR DISC BRAKE DISC BRAKE | |||||
| Foot brake, parking brake & clutch (For free play, stroke & operation) | I | I | I | I | PERIODIC MAINTENANCE PERIODIC MAINTENANCE PERIODIC MAINTENANCE | |||||
| Air conditioner filter (1) | R | R | R | R | IN-CABIN MICROFILTER | |||||
| (1) Maintenance items with "*" should be performed more frequently according to "Maintenance Under Severe Driving Conditions". (2) Automatic transmission fluid is maintenance-free. | ||||||||||
| (1) | Maintenance items with "*" should be performed more frequently according to "Maintenance Under Severe Driving Conditions". |
| (2) | Automatic transmission fluid is maintenance-free. |
CHASSIS AND BODY MAINTENANCE
The maintenance intervals shown in the preceding information are for normal operating conditions. If the vehicle is mainly operated under severe driving conditions as shown below, more frequent maintenance must be performed on the following items as shown in the table.
Severe driving conditions
- Driving under dusty conditions
- Driving repeatedly short distances
- Towing a trailer or caravan
- Extensive idling
- Driving in extremely adverse weather conditions or in areas where ambient temperatures are either extremely low or extremely high
- Driving in high humidity or mountainous areas
- Driving in areas using salt or other corrosive areas
- Driving on rough and/or muddy roads or in the desert
- Driving with frequent use of braking or in mountainous areas
- Frequent driving in water
| Driving condition | Maintenance item | Maintenance operation | Maintenance interval | Reference Information | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | . | . | . | . | . | . | . | . | . | Air cleaner filter | Viscous paper type | Replace | More frequently | AIR CLEANER FILTER |
| A | B | C | D | . | . | . | . | . | . | Engine oil & engine oil filter | Replace | Every 5,000 km (3,000 miles) or 3 months | ENGINE OIL OIL FILTER | |
| . | . | . | . | . | F | . | . | . | . | Brake fluid | Replace | Every 20,000 km (12,000 miles) or 12 months | BRAKE FLUID | |
| . | . | C | . | . | . | . | H | . | . | Differential gear oil | Replace | Every 40,000 km (24,000 miles) or 24 months | REAR DIFFERENTIAL GEAR OIL: R200 REAR DIFFERENTIAL GEAR OIL: R200V | |
| . | . | . | . | . | . | G | H | . | . | Steering gear & linkage, axle & suspension parts | Inspect | Every 20,000 km (12,000 miles) or 12 months | STEERING GEAR AND LINKAGE AXLE AND SUSPENSION PARTS | |
| A | . | C | . | . | . | G | H | I | . | Brake pads, rotors, drums & linings | Inspect | Every 10,000 km (6,000 miles) or 6 months | FRONT DISC BRAKE REAR DISC BRAKE DISC BRAKE | |
| A | . | . | . | . | . | . | . | . | . | Air conditioner filter | Replace | More frequently | IN-CABIN MICROFILTER | |
DRIVING CONDITION
FOR NORTH AMERICA : Engine Oil Recommendation
NISSAN recommends the use of an energy conserving oil in order to improve fuel economy.
Select only engine oils that meet the American Petroleum Institute (API) certification and International Lubricant Standardization and Approval Committee (ILSAC) certification and SAE viscosity standard. These oils have the API certification mark on the front of the container. Oils which do not have the specified quality label should not be used as they could cause engine damage.
Scheme 54
FOR NORTH AMERICA : Anti-Freeze Coolant Mixture Ratio
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary.
| WARNING | Never remove the radiator or coolant reservoir cap when the engine is hot. Wait until the engine and radiator cool down. Serious burns could be caused by high pressure fluid escaping from the radiator. See applicable precautions. If your vehicle overheats or in case of emergency go to appropriate portion of this information. The radiator is equipped with a pressure type radiator cap. To prevent engine damage, use only a genuine NISSAN radiator cap. |
| CAUTION | When adding or replacing coolant, be sure to use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent. Genuine NISSAN Long Life Antifreeze/Coolant (blue) is pre-diluted to provide antifreeze protection to -34°F (-37°C). If additional freeze protection is needed due to weather where you operate your vehicle, add Genuine NISSAN Long Life Antifreeze/Coolant (blue) concentrate following the directions on the container. If an equivalent coolant other than Genuine NISSAN Long Life Antifreeze/Coolant (blue) is used, follow the coolant manufactur's instructions to maintain minimum antifreeze protection to -34°F (-37°C). The use of other types of coolant solutions other than Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent may damage the engine cooling system. The life expectancy of the factory-fill coolant is 105,000 miles (168.000 km) or 7 years. Mixing any other type of coolant other than Genuine NISSAN Long Life Antifreeze/Coolant (blue), including Genuine NISSAN Long Life Antifreeze/Coolant (green), or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant. Refer to the Nissan Service and Maintenance Guide for more details. |
FOR MEXICO : SAE Viscosity Number
GASOLINE ENGINE
Scheme 55
- 10W-30 is preferable. 5W-30 is also preferable and will improve fuel economy. If 10W-30 or 5W-30 is not available, select the viscosity, from the chart, that is suitable for the outside temperature range.
DIFFERENTIAL GEAR OIL
Scheme 56
- For warm and areas: 80W-90 for the differential gear is preferable.
- For hot areas: 90 is suitable for ambient temperatures below 40°C (104°F).
FOR MEXICO : Engine Coolant Mixture Ratio
The engine cooling system is filled at the factory with a high-quality, year-round and extended life engine coolant. The high quality engine coolant contains the specific solutions effective for the anti-corrosion and the anti-freeze function. Therefore, additional cooling system additives are not necessary.
| CAUTION | When adding or replacing coolant, be sure to use only Genuine NISSAN Engine Coolant or equivalent in its quality with the proper mixture ratio. See the examples shown below. The use of other types of engine coolant may damage the engine cooling system. |
| Outside temperature down to | Composition | ||
|---|---|---|---|
| °C | °F | Engine coolant (Concentrated) | Demineralized water or distilled water |
| 15 | 5 | 30% | 70% |
| 35 | 30 | 50% | 50% |
OUTSIDE TEMPERATURE SPECIFICATION
- When checking the engine coolant mixture ratio by the coolant hydrometer, use the chart below to correct your hydrometer reading (specific gravity) according to coolant temperature.
Mixed coolant specific gravity
| Unit: specific gravity | ||||
|---|---|---|---|---|
| Engine coolant mixture ratio | Coolant temperature °C (°F) | |||
| 15 (59) | 25 (77) | 35 (95) | 45 (113) | |
| 30% | 1.046 - 1.050 | 1.042 - 1.046 | 1.038 - 1.042 | 1.033 - 1.038 |
| 50% | 1.076 - 1.080 | 1.070 - 1.076 | 1.065 - 1.071 | 1.059 - 1.065 |
MIXED COOLANT SPECIFIC GRAVITY SPECIFICATION
| WARNING | Never remove the radiator cap when the engine is hot. Serious burns could be caused by high pressure fluid escaping from the radiator. Wait until the engine and radiator cool down. |
Scheme 57
DRIVE BELT : Checking
| WARNING | Be sure to perform this step when engine is stopped. |
- Check that the indicator (C) (notch on fixed side) of drive belt auto-tensioner is within the possible use range (A). NOTE: Check the drive belt auto-tensioner indication when the engine is cold. When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B) in the figure.
- Visually check the entire drive belt for wear, damage or crack.
- If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.
DISC BRAKE : Front Disc Brake
2 PISTON TYPE
| Unit: mm (in) | ||
|---|---|---|
| Item | Limit | |
| Brake pad | Wear thickness | 2.0 (0.079) |
| Disc rotor | Wear thickness | 26.0 (1.024) |
| Thickness variation (measured at 8 positions) | 0.015 (0.0006) | |
| Runout (with it attached to the vehicle) | 0.035 (0.0014) | |
FRONT DISC BRAKE SPECIFICATION
4 PISTON TYPE
| Unit: mm (in) | ||
|---|---|---|
| Item | Limit | |
| Brake pad | Wear thickness | 2.0 (0.079) |
| Disc rotor | Wear thickness | 30.0 (1.181) |
| Thickness variation (measured at 8 positions) | 0.015 (0.0006) | |
| Runout (with it attached to the vehicle) | 0.035 (0.0014) | |
PISTON SPECIFICATION
DISC BRAKE : Rear Disc Brake
1 PISTON TYPE
| Unit: mm (in) | ||
|---|---|---|
| Item | Limit | |
| Brake pad | Wear thickness | 2.0 (0.079) |
| Disc rotor | Wear thickness | 14.0 (0.551) |
| Thickness variation (measured at 8 positions) | 0.015 (0.0006) | |
| Runout (with it attached to the vehicle) | 0.055 (0.0022) | |
REAR DISC BRAKE SPECIFICATION
2 PISTON TYPE
| Unit: mm (in) | ||
|---|---|---|
| Item | Limit | |
| Brake pad | Wear thickness | 2.0 (0.079) |
| Disc rotor | Wear thickness | 18.0 (0.709) |
| Thickness variation (measured at 8 positions) | 0.015 (0.0006) | |
| Runout (with it attached to the vehicle) | 0.055 (0.0022) | |
REAR DISC BRAKE SPECIFICATION
DRIVE BELT : Drive Belt
DRIVE BELT
| Tension of drive belt | Belt tension is not necessary, as it is automatically adjusted by drive belt auto-tensioner. |
DRIVE BELT SPECIFICATION
ENGINE COOLANT CAPACITY (APPROXIMATE)
| Unit: l (US qt, Imp qt) | ||
|---|---|---|
| Engine coolant capacity [With reservoir tank ("MAX" level)] | A/T models | 8.5 (9, 7-1/2) |
| M/T models | 8.6 (9-1/8, 7-5/8) | |
| Reservoir tank engine coolant capacity (At "MAX" level) | 0.8 (7/8, 3/4) | |
ENGINE COOLANT CAPACITY SPECIFICATION
ENGINE OIL CAPACITY (APPROXIMATE)
| Unit: l (US qt, lmp qt) | ||
|---|---|---|
| Drain and refill | With oil filter change | 4.9 (5-1/8, 4-1/4) |
| Without oil filter change | 4.6 (4-7/8, 4) | |
| Dry engine (Overhaul) | 5.7 (6, 5) | |
ENGINE OIL CAPACITY SPECIFICATION
SPARK PLUG : Spark Plug
SPARK PLUG
| Unit: mm (in) | ||
|---|---|---|
| Make | DENSO | |
| Standard type | FXE24HR11 | |
| Gap (Nominal) | Standard | 1.1 (0.043) |
| Limit | 1.4 (0.055) | |
SPARK PLUG SPECIFICATION
ROAD WHEEL : Road Wheel
CONVENTIONAL
| Item | Limit | |
|---|---|---|
| Radial runout | Lateral deflection | Less than 0.3 mm (0.012 in) |
| Vertical deflection | ||
| Allowable unbalance | Dynamic (At flange) | Less than 5 g (0.17 oz) (one side) |
| Static (At flange) | Less than 10 g (0.35 oz) | |
ROAD WHEEL SPECIFICATION
EMERGENCY
| Item | Limit | |
|---|---|---|
| Radial runout | Lateral deflection | Less than 1.5 mm (0.059 in) |
| Vertical deflection | ||
ITEM SPECIFICATION
FOR NORTH AMERICA : Schedule 1
EMISSION CONTROL SYSTEM MAINTENANCE
NISMO models
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 3.75 (6) 3 | 7.50 (12) 6 | 11.25 (18) 9 | 15 (24) 12 | 18.75 (30) 15 | 22.5 (36) 18 | 26.25 (42) 21 | 30 (48) 24 |
| Spark plugs (Iridium-tipped type) | NOTE | Replace every 60,000 miles (96,000 km). | |||||||
EMISSION CONTROL SYSTEM MAINTENANCE SCHEDULE
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 33.75 (54) 27 | 37.5 (60) 30 | 41.25 (66) 33 | 45 (72) 36 | 48.75 (78) 39 | 52.5 (84) 42 | 56.25 (90) 45 | 60 (96) 48 |
| Spark plugs (Iridium-tipped type) | (1) | Replace every 60,000 miles (96,000 km). | |||||||
| (1) Replace spark plug when the spark plug gap exceeds 1.3 mm (0.051 in) even if within specified periodic replacement mileage. | |||||||||
| (1) | Replace spark plug when the spark plug gap exceeds 1.3 mm (0.051 in) even if within specified periodic replacement mileage. |
MAINTENANCE OPERATION REFERENCE
FOR NORTH AMERICA : Schedule 2
EMISSION CONTROL SYSTEM MAINTENANCE
NISMO models
| MAINTENANCE OPERATION | MAINTENANCE INTERVAL | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Perform at number of miles, kilometers or months, whichever comes first. | Miles x 1,000 (km x 1,000) Months | 7.5 (12) 6 | 15 (24) 12 | 22.5 (36) 18 | 30 (48) 24 | 37.75 (60) 30 | 45 (72) 36 | 52.5 (84) 42 | 60 (96) 48 |
| Spark plugs (Iridium-tipped type) | (1) | Replace every 60,000 miles (96,000 km). | |||||||
| (1) Replace spark plug when the spark plug gap exceeds 1.3 mm (0.051 in) even if within specified periodic replacement mileage. | |||||||||
| (1) | Replace spark plug when the spark plug gap exceeds 1.3 mm (0.051 in) even if within specified periodic replacement mileage. |
MAINTENANCE OPERATION REFERENCE
SPARK PLUG
| Unit: mm (in) | ||
|---|---|---|
| Make | DENSO | |
| Standard type | FXE24HR11 | |
| Gap (Nominal) | Standard | 1.1 (0.043) |
| Limit | 1.3 (0.051) | |
SPARK PLUG SPECIFICATION