ADHESIVE
| Item | Specified adhesive |
|---|---|
| Windshield glass Quarter window glass Liftgate window glass Roof glass | 3 M™ AAD part No. 8609 super fast urethane and 3 M™ AAD part No. 8608 super fast urethane primer or equivalent |
ADHESIVE SPECIFICATION
| Item | Specified adhesive tape |
|---|---|
| Windshield molding Roof molding front and rear | Double-sided tape: Generic products [6.0 mm (0.24 in) width and 0.2 mm (0.008 in) thickness] |
ADHESIVE TAPE SPECIFICATION
LUBRICANT
| Item | Specified lubricant | Quantity | |
|---|---|---|---|
| Degrease agent | Grease and dirt removal from parts surface | 3M™ AAD Part No. 8906 or equivalent | As required |
LUBRICANT SPECIFICATION
GENERAL
The windshield glass, quarter window glass, liftgate window glass and roof glass are attached by an urethane-base adhesive to the window frame. This adhesive provides improved glass holding and sealing, and also gives body openings a greater structural strength.
ITEMS
| Item | Application | Quantity |
|---|---|---|
| Wire (diameter x length) | For cutting adhesive | Five pieces of wire 0.6 mm x 1 m (0.02 in x 3.3 ft) |
| Glass adhesive knife | For cutting adhesive | One |
| Sealant gun | For adhesive application | One |
| Wiping shop towels | As required | |
| Sealer | For prevention of water and wind leaks after adhesive application | As required |
| 3M™ AAD Part No. 8906 or equivalent | For cleaning or degreasing body parts and glasses | As required |
| Glass holder MB990480 | For securing of window glass | Two |
WINDSHIELD GLASS ADHESIVE APPLICATION REFERENCE CHART
| CAUTION | Do not apply primer on the adhesion surface, as adhesion may be reduced. |
