BUZZ NOISE CHECK MODE
Inserting a CD during the speaker connection check mode shifts the mode to the buzz noise check mode, and the buzz noise sound of each speaker can be checked.
As with the speaker connection check mode, press the [CH6] button to switch the output speaker of the buzz noise check sound.
Check that the buzz noise sound is output from the output speaker of buzz noise check sound.
Note. "SPKR" is displayed as "BUZZ" during buzz noise check mode.
Refer to SERVICE MODE .
Scheme 5
Disconnect the connector, and remove by twisting as shown in the illustration.
Scheme 6
Scheme 7
Disconnect the connector, and remove by twisting as shown in the illustration.
