GENERAL SPECIFICATIONS
| Item | Specifications | |
|---|---|---|
| Master cylinder | Type | Tandem type |
| I.D. mm (in) | 20.6 (0.81) | |
| Brake booster | Type | Vacuum type, single |
| Effective dia. of power cylinder mm (in) | 255 (10.0) | |
| Boosting ratio | 8.5 (Pedal pressure: 160N) | |
| Rear wheel hydraulic control method | Electronic control braking force distribution system (EBD) | |
| Front brake | Type | Floating caliper 1 piston ventilated disc (V6-S57) |
| Disc effective dia x thickness mm (in) | 294 x 26 (11.6 x 1.02) | |
| Wheel cylinder I.D. mm (in) | 57.1 (2.25) | |
| Pad thickness mm (in) | 10.0 (0.39) | |
| Clearance adjustment | Automatic adjustment | |
| Rear brake | Type | Floating caliper 1 piston solid disc (S6-S38) |
| Disc effective dia x thickness mm (in) | 302 x 10 (11.9 x 0.39) | |
| Wheel cylinder I.D. mm (in) | 38.1 (1.50) | |
| Pad thickness mm (in) | 10.0 (0.39) | |
| Clearance adjustment | Automatic adjustment | |
GENERAL SPECIFICATIONS
SERVICE SPECIFICATIONS
| Item | Standard value | Limit | |
|---|---|---|---|
| Brake pedal height mm (in) | 221.8 - 227.8 (8.7 - 9.0) | ||
| Dimension from the brake booster stud bolt end to the clevis hole center mm (in) | 75.8 - 80.2 (2.98 - 3.16) | ||
| Brake pedal play mm (in) | 3 - 8 (0.12 - 0.31) | ||
| Pedal-to-floor clearance when brake pedal is depressed mm (in) [Pedal depression force: approx. 500 N] | 80 (3.15) or more | ||
| Fluid pressure generated by brake booster non-servo effect test kPa (psi) | Pedal depression force: 100 N | 200 (29) or more | |
| Pedal depression force: 300 N | 1,800 (261) or more | ||
| Fluid pressure generated by brake booster servo effect test kPa (psi) | Pedal depression force: 100 N | 6,050 - 7,950 (877 - 1,153) | |
| Pedal depression force: 300 N | 10,720 (1,554) or more | ||
| Front disc brake | Pad thickness mm (in) | 10.0 (0.39) | Minimum 2.0 (0.08) |
| Brake disc thickness mm (in) | 26.0 (1.02) | Minimum 24.4 (0.96) | |
| Brake disc runout mm (in) | 0.06 (0.0024) | ||
| Brake drag force N (lb) | 68 (15.3) or less | ||
| Rear disc brake | Pad thickness mm (in) | 10.0 (0.39) | Minimum 2.0 (0.08) |
| Brake disc thickness mm (in) | 10.0 (0.39) | Minimum 8.4 (0.33) | |
| Brake disc runout mm (in) | 0.08 (0.0032) | ||
| Brake drag force N (lb) | 68 (15.3) or less | ||
| Front wheel bearing looseness mm (in) | 0.05 (0.0020) | ||
| Rear wheel bearing looseness mm (in) | 0.05 (0.0020) | ||
| Brake pedal distortion mm (in) | 250 - 254 (9.8 - 10.0) | ||
SERVICE SPECIFICATIONS