PRECAUTIONS ON HOW TO USE THE HEADLIGHT ASSEMBLY
Be careful with the following items as resin lenses are used in the headlight assembly.
- Don't illuminate the headlight for three minutes or more when the headlight is covered with scratch protector.
- Don't tape the outer lens.
- Don't scratch the outer lens surface with a sharp edged special tool.
- Use the specified genuine bulb.
BRACKET REPAIR OF HEADLIGHT ASSEMBLY
| CAUTION | If damage is present to locations other than the repairable bracket, replace the assembly. Apply a tape to the area around the damaged bracket to prevent damage. During repair work, be careful not to damage the repair bracket installation bosses. |
When brackets A, B and C shown in the illustration are damaged, a low-cost repair can be performed by mounting a repair bracket.
