>> B << MASTER CYLINDER ASSEMBLY AIR BLEEDING
When removed the master cylinder assembly, bleed the master cylinder in the following procedure to make bleeding of the brake pipeline easier. (When no brake fluid is in the master cylinder)
Scheme 27
Scheme 27: >> B << MASTER CYLINDER ASSEMBLY AIR BLEEDING
- Fill the brake fluid reservoir with the brake fluid.
- Depress and hold the brake pedal.
- Another operator closes the master cylinder outlets with his fingers.
- In this condition, release the brake pedal.
- Repeat Steps 2 to 4 for 3 or 4 times to fill the master cylinder with the brake fluid.
DISASSEMBLY AND ASSEMBLY
| CAUTION | Take care not to contact the parts or tools to the caliper because the paint of caliper will be scratched. And if there is brake fluid on the caliper, wipe it off quickly. |
Scheme 28
Scheme 29
Scheme 29: LUBRICATION POINTS
| CAUTION | Take care not to contact the parts or tools to the caliper because the paint of caliper will be scratched. And if there is brake fluid on the caliper, wipe it off quickly. |
Scheme 30
Scheme 31
Scheme 31: LUBRICATION POINTS
