FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Transaxle assembly | |
| Center member attaching bolt | 69 ± 10 N.m (51 ± 7 ft-lb) |
| Cover | 7.0 ± 1.0 N.m (62 ± 9 ft-lb) |
| Driveshaft connecting nut | 245 ± 29 N.m (181 ± 21 ft-lb) |
| Front roll stopper bracket retainer nut | 52 ± 7 N.m (39 ± 5 ft-lb) |
| Lower arm connecting nut | 108 ± 10 N.m (80 ± 7 ft-lb) |
| Starter motor attaching bolt | 48 ± 5 N.m (36 ± 4 ft-lb) |
| Tie rod end connecting nut | 25 ± 5 N.m (19 ± 3 ft-lb) |
| Transaxle assembly upper part coupling bolt | 48 ± 5 N.m (36 ± 4 ft-lb) |
| Transaxle mount bracket attaching nut | 47 ± 7 N.m (35 ± 5 ft-lb) |
| Transaxle mount stopper attaching nut | 82 ± 7 N.m (61 ± 5 ft-lb) |
| Transmission oil drain plug | 32 ± 2 N.m (24 ± 1 ft-lb) |
| Transmission oil filler plug | 32 ± 2 N.m (24 ± 1 ft-lb) |
| Transaxle control | |
| Select lever retainer nut | 10 ± 1 N.m (84 ± 13 in-lb) |
| Shift cable and select cable assembly attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) |
| Shift lever base bracket attaching bolt | 12 ± 2 N.m (102 ± 22 in-lb) |
| Shift lever retainer nut | 14 ± 5 N.m (120 ± 22 in-lb) |
Fastener Tightening Specifications
