FASTENER TIGHTENING SPECIFICATIONS
| ITEMS | SPECIFICATIONS | |
|---|---|---|
| Transaxle | Control cable bracket | 23 ± 3 N.m (17 ± 2 ft-lb) |
| Eye bolt | 30 ± 3 N.m (22 ± 2 ft-lb) | |
| Fluid temperature sensor | 11 ± 1 N.m (95 ± 9 in-lb) | |
| Input shaft speed sensor | 11 ± 1 N.m (95 ± 9 in-lb) | |
| Manual control lever | 22 ± 3 N.m (16 ± 2 ft-lb) | |
| Manual control shaft detent | 6 ± 1 N.m (52 ± 9 in-lb) | |
| Oil filter | 12 ± 1 N.m (104 ± 9 in-lb) | |
| Oil pump | 29 ± 2 N.m (21 ± 1 ft-lb) | |
| Output shaft bearing retainer | 29 ± 2 N.m (21 ± 1 ft-lb) | |
| Output shaft jam nut | 167 ± 10 N.m (123 ± 7 ft-lb) | |
| Output shaft speed sensor | 11 ± 1 N.m (95 ± 9 in-lb) | |
| Park/neutral position switch (PNP switch) | 11 ± 1 N.m (95 ± 9 in-lb) | |
| Rear cover | 23 ± 3 N.m (17 ± 2 ft-lb) | |
| Roll stopper bracket | 69 ± 10 N.m (51 ± 7 ft-lb) | |
| Sealing cap | 5 ± 1 N.m (43 ± 9 in-lb) | |
| Torque converter housing | 48 ± 6 N.m (35 ± 4 ft-lb) | |
| Transfer drive gear | 34 ± 2 N.m (25 ± 1 ft-lb) | |
| Valve body cover | 11 ± 1 N.m (95 ± 9 in-lb) | |
| Valve body mounting bolt | 11 ± 1 N.m (95 ± 9 in-lb) | |
| Wiring harness bracket | 23 ± 3 N.m (17 ± 2 ft-lb) | |
| Components | Differential drive gear | 132 ± 5 N.m (98 ± 4 ft-lb) |
| Plate | 6 ± 1 N.m (52 ± 9 in-lb) | |
| Solenoid valve support | 6 ± 1 N.m (52 ± 9 in-lb) | |
| Valve body | 11 ± 1 N.m (95 ± 9 in-lb) | |
FASTENER TIGHTENING SPECIFICATIONS
GENERAL SPECIFICATIONS
| ITEMS | SPECIFICATIONS | |
|---|---|---|
| Type | Electronically controlled 4-speed full-automatic | |
| Torque converter | Type | 3-element with torque converter clutch |
| Stall torque ratio | 2.0 | |
| Gear ratio | 1st | 2.842 |
| 2nd | 1.529 | |
| 3rd | 1.000 | |
| 4th | 0.712 | |
| Reverse | 2.480 | |
| Final gear ratio | 4.041 | |
General Specifications Table
