Home ReviewsRefund
Home/Mitsubishi/Lancer Evolution/Mitsubishi Lancer Evolution X (2007-2016)/Repair manual/Hands Free Module - Lancer Evolution/METHODS FOR PAIRING AND PAIRING DELETION WITH BLUETOOTH® DE…
Contents Section: Hands Free Module - Lancer Evolution All sections

METHODS FOR PAIRING AND PAIRING DELETION WITH BLUETOOTH® DEVICE USING MULTIVISION DISPLAY Mitsubishi Lancer Evolution X

Hands Free Module - Lancer Evolution 14 illustrations ~421 words

METHODS FOR PAIRING AND PAIRING DELETION WITH BLUETOOTH® DEVICE USING MULTIVISION DISPLAY

As for vehicles with MMCS, "pairing" registration of the Bluetooth® device and deletion of paired device from hands free module can be done by touch panel operation on the multivision display.

Note. Some Bluetooth® devices (cellular phone and music player) may not be compatible with the hands free module. A maximum of seven Bluetooth® devices can be registered. This system cannot be used when a battery of Bluetooth® devices was exhausted.

Scheme 443

Scheme 443: OPERATION ON THE MOBILE PHONE SCREEN
Scheme 443: OPERATION ON THE MOBILE PHONE SCREEN

Scheme 444

Scheme 444
Scheme 444

Scheme 445

Scheme 445
Scheme 445

Scheme 446

Scheme 446
Scheme 446

Scheme 447

Scheme 447
Scheme 447
  1. When press the (1) in the illustration.
  2. Display the INFOR screen, and select "Mobile Phone."
  3. Select "1" in the illustration on the Mobile Phone screen.
  4. Select "Pairing."
  5. The pairing list screen is displayed.

Scheme 448

Scheme 448: OPERATION ON THE A/V MODE SCREEN
Scheme 448: OPERATION ON THE A/V MODE SCREEN

Scheme 449

Scheme 449
Scheme 449

Scheme 450

Scheme 450
Scheme 450

Scheme 451

Scheme 451
Scheme 451
  1. Press the (1) in the illustration.
  2. Display the A/V mode screen, and select "Bluetooth Audio." NOTE: When there are no active connections between the Bluetooth® Audio and the hands free module, "There are no active connections." is displayed.
  3. Select "1" in the illustration on the Bluetooth Audio screen.
  4. Select "Pairing."
  5. The pairing list screen is displayed.

Scheme 452

Scheme 452
Scheme 452

Scheme 453

Scheme 453
Scheme 453
  1. Shift the selector lever to P (parking) position < CVT > or shift lever to N (neutral) position < M/T or TC-SST > and pull the parking brake lever.
  2. Display the pairing list screen, and select "New Device." NOTE: When the vehicle is being driven, or when the vehicle is driven during the pairing operation, "This function is disabled while driving." is displayed for 4 seconds, and the display returns to the pairing list screen.
  3. Enter the 4-digit code on the Pin code screen, and select "Enter."
  4. "Begin Pairing procedure on device. See device's manual for instructions." is displayed on the screen.
  5. Refer to the manual for your device and enter into the device the pin code. NOTE: When "Cancel" is selected or the pairing is failed, the display returns to the pairing list screen.
  6. When the pairing is completed, the display returns to the pairing list screen. NOTE: When 7 Bluetooth® devices are already paired to the hands free module, "Maximum device paired. Please delete a paired device before pairing a new device." is displayed.

Scheme 454

Scheme 454
Scheme 454

Scheme 455

Scheme 455
Scheme 455

Scheme 456

Scheme 456
Scheme 456
  1. Display the pairing list screen, and select the "Bluetooth® device" to be deleted.
  2. Select "Delete."
  3. When "Yes" is selected, the Bluetooth® device is deleted and the display returns to the pairing list screen.