Home ReviewsRefund
Home/Mitsubishi/Lancer Evolution/Mitsubishi Lancer Evolution X (2007-2016)/Repair manual/General Information - Except Lancer Evolution/HOW TO SHIFT LOCK FORCED RELEASE
Contents Section: General Information - Except Lancer Evolution All sections

HOW TO SHIFT LOCK FORCED RELEASE Mitsubishi Lancer Evolution X

General Information - Except Lancer Evolution 3 illustrations ~148 words

HOW TO SHIFT LOCK FORCED RELEASE

If the shift lever cannot be moved from the P position due to discharged battery or similar reasons, release the shift lock by observing the procedure below.

Scheme 27

Scheme 27: < TC-SST >
Scheme 27: < TC-SST >

Scheme 28

Scheme 28
Scheme 28
  1. Remove the floor console box cup holder and the floor console panel assembly (Refer to «FLOOR CONSOLE ASSEMBLY»(/mitsubishi/lancer-evolution/x-2007-2016/remont/gauges-instrument-panels/#interior-except-lancer-evolution) ).
  2. Turn the ignition switch to the position other than the LOCK (OFF) position.
  3. Insert a screwdriver or a similar tool from the section "A" shown in the figure. While pressing the shift lock forced release switch, move the shift lever.

Scheme 29

Scheme 29: < CVT >
Scheme 29: < CVT >
  1. Turn the ignition switch to the position other than the LOCK (OFF) position.
  2. Remove the shift lock forced release switch cover shown in the figure. While pressing the shift lock forced release switch with a screwdriver or a similar tool, move the selector lever.