Home ReviewsRefund
Home/Mitsubishi/Lancer Evolution/Mitsubishi Lancer Evolution X (2007-2016)/Repair manual/Engine Mechanical <2.0l Non-Turbo> - Except Lancer Evolution/<< E >> ENGINE MOUNTING INSULATOR REMOVAL
Contents Section: Engine Mechanical <2.0l Non-Turbo> - Except Lancer Evolution All sections

<< E >> ENGINE MOUNTING INSULATOR REMOVAL Mitsubishi Lancer Evolution X

Engine Mechanical <2.0l Non-Turbo> - Except Lancer Evolution 4 illustrations ~146 words

<< E >> ENGINE MOUNTING INSULATOR REMOVAL

CAUTIONWhen supporting the engine assembly with a garage jack, be careful not to deform the engine oil pan.

Scheme 222

Scheme 222
Scheme 222

Scheme 223

Scheme 223
Scheme 223

Scheme 224

Scheme 224
Scheme 224
  1. Place a garage jack against the engine oil pan with a piece of wood in between to support the engine assembly.
  2. Remove the special tool for holding the engine assembly, which has been set when the transaxle assembly is removed. MB991928 or MB991895 MB991527 MB992201
  3. Operate a garage jack so that the engine weight is not applied to the engine mounting insulator, and remove the engine mounting insulator.

Scheme 225

Scheme 225: << F >> ENGINE ASSEMBLY REMOVAL
Scheme 225: << F >> ENGINE ASSEMBLY REMOVAL
  1. Mount the special tool MB991454 to the idler pulley bracket and the engine hanger, and set the chain block.
  2. After checking that all cables, hoses and wiring harness connectors and so on are disconnected from the engine, lift the engine assembly slowly with the chain block to remove the engine assembly upward from the engine compartment.