Home ReviewsRefund
Home/Mitsubishi/Lancer Evolution/Mitsubishi Lancer Evolution X (2007-2016)/Repair manual/Engine Cooling - Except Lancer Evolution/>> A << THERMOSTAT INSTALLATION
Contents Section: Engine Cooling - Except Lancer Evolution All sections

>> A << THERMOSTAT INSTALLATION Mitsubishi Lancer Evolution X

Engine Cooling - Except Lancer Evolution 3 illustrations ~122 words

>> A << THERMOSTAT INSTALLATION

CAUTIONMake absolutely sure that no oil adheres to the rubber ring of the thermostat. Also do not fold or scratch the rubber ring during installation.

Install the thermostat so that the jiggle valve is facing straight up. Be careful not to fold or scratch the rubber ring.

Scheme 32

Scheme 32
Scheme 32

Scheme 33

Scheme 33: >> B << RADIATOR LOWER HOSE CONNECTION
Scheme 33: >> B << RADIATOR LOWER HOSE CONNECTION
  1. Insert the radiator lower hose as far as the projection of the cooling water inlet hose fitting.
  2. Align the mating marks on the radiator lower hose and hose clamp, and then connect the radiator lower hose.

Scheme 34

Scheme 34: REMOVAL AND INSTALLATION < 2.0L ENGINE TURBO >
Scheme 34: REMOVAL AND INSTALLATION < 2.0L ENGINE TURBO >

Make mating marks on the radiator lower hose and the hose clamp as shown in illustration to install them in the original position. Then, remove them.

CAUTIONMake absolutely sure that no oil adheres to the rubber ring of the thermostat. Also do not fold or scratch the rubber ring during installation.

Install the thermostat so that the jiggle valve is facing straight up. Be careful not to fold or scratch the rubber ring.