Home ReviewsRefund
Home/Mitsubishi/Lancer Evolution/Mitsubishi Lancer Evolution X (2007-2016)/Repair manual/Continuously Variable Transaxle Overhaul - Except Lancer Evolution/REDUCTION GEAR SUB-ASSEMBLY
Contents Section: Continuously Variable Transaxle Overhaul - Except Lancer Evolution All sections

REDUCTION GEAR SUB-ASSEMBLY Mitsubishi Lancer Evolution X

Continuously Variable Transaxle Overhaul - Except Lancer Evolution

REDUCTION GEAR SUB-ASSEMBLY

Measure the inner race press-fit shaft diameter of reduction gear sub-assembly, and replace the assembly if the diameter does not meet the standard value.

Standard values

  1. Converter housing side: ø30.008 - 30.029 mm (1.1814 - 1.1822 in)
  2. Transaxle case side: ø30.008 - 30.029 mm (1.1814 - 1.1822 in)