SEAT BELT WARNING SYSTEM
- When the ignition switch is turned "ON" without fastening the seat belts (seat belt switch OFF), the tone alarm will sound for approximately 6 seconds to warn the driver to fasten the seat belts. When the seat belts are fastened, the tone alarm will stop sounding.
- When the ignition switch is turned ON without fastening the seat belt, the seat belt warning light comes on to warn the driver to fasten the seat belt.
SEAT BELT WARNING SYSTEM DIAGNOSIS
The seat belt warning system is controlled by Simplified Warning System (SWS). For troubleshooting, refer to SWS DIAGNOSIS .
Scheme 164
REMOVAL AND INSTALLATION
The following bolts and screws are used for installing the instrument panel. Bolts and screws are indicated as marks (Scheme 165)
Scheme 165
| CAUTION | Refer to AIR BAG SAFETY PRECAUTIONS and PASSENGER-SIDE AIR BAG MODULE before removing the passenger side air bag module. Do not subject the SRS-ECU to any shocks when removing or installing the instrument panel. |
Scheme 166
Scheme 167
<< A >>SRS FRONT PASSENGER'S AIR BAG MODULE REMOVAL
| CAUTION | Do not damage the claws of the hinge when removing the front passenger's air bag module. Store the removed front passenger's air bag module with the deployed side facing upward, in a clean and dry place. |
Insert the flat tipped screwdriver into the position shown in the illustration and pull up the screwdriver to disengage the claws for removal of the front passenger's air bag module.
