GENERAL DESCRIPTION
The front suspension is a McPherson strut with coil spring. The shock absorber is gas-filled hydraulic double-tube type.
Scheme 3
If the front suspension is faulty, the vehicle will not run straightforward or noise will occur. Incorrect wheel alignment, malfunction of strut assembly, stabilizer bar, coil spring, or worn or out-of-balance tires can cause these problems.
Use these steps to plan your diagnostic strategy. If you follow them thoroughly, you will be sure that you have exhausted most of the possible ways to find a front suspension fault.
- Gather information from the customer.
- Verify that the condition described by the customer exists.
- Find and repair the malfunction by following the Symptom Chart and Symptom Procedures.
- Verify malfunction is eliminated.