Climate Control - Overview: Adjustments MINI Cooper I

Mode 2: Calibration Run

The objective of the calibration procedure is to correct the position drift of the servomotors for temperature and air distribution control. During a calibration run

1. Both servomotors are driven to their two end positions and the new values stored in the IHKA EEPROM.
2. All LED's activated simultaneously.
3. Blower streamer bars individually illuminated.
4. CA flashes in the central display panel at 0.5 Hz.

Scheme 169

There are three possible operating statuses shown in the central display

1. CA = Calibration Active
2. CC = Calibration Complete
3. FF = Fault