Home ReviewsRefund
Home/Mercury/Sable/Mercury Sable V (2007-2009)/Repair manual/Interior/illumination Lights/Interior Lighting System: Removal & Installation
Contents Wiring diagrams Section: Interior/illumination Lights All sections

Interior Lighting System: Removal & Installation Mercury Sable V

Interior/illumination Lights ~109 words

REMOVAL AND INSTALLATION

Front Interior Lamp

  1. Pull down on the rear of the overhead console to remove the overhead console from the retaining clips. Disconnect the electrical connectors.
  2. Release the 4 retaining clips, and remove the lamp assembly from the overhead console.
  3. Release the 6 retaining clips, and remove the lens from the lamp assembly. NOTE: The bulbs can be pushed out from the backside of the lamp assembly. Replace the bulb(s) as necessary.
  4. Remove the interior lamp lens.
  5. Release the 2 retaining clips (through the access holes) and remove the interior lamp. Disconnect the electrical connector.
  6. To install, reverse the removal procedure.

More articles — Interior Lighting System