Home/Mercury/Sable/Mercury Sable V (2007-2009)/Repair manual/Automatic Trans/Automatic Transmission Cooling: Specifications
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission Cooling: Specifications Mercury Sable V

GENERAL SPECIFICATIONS

ItemSpecification
Fluid
MERCON® V, MERCON® SP, Motorcraft Premium Automatic Transmission Fluid, Motorcraft Continuously Variable Chain Type Transmission Fluid and FNR5 Automatic Transmission Fluid are not interchangeable transmission fluids. The use of any fluid other than what is recommended for the transaxle will cause transaxle damage. Refer to the fluid specification for the correct fluid. The transmission fluid should be changed every 96,560 km (60,000 mi) regardless of normal or special operating conditions.
CAUTION: Do not use water-based cleaners to clean or flush the cooler tubes or transmission damage will occur. Mineral spirits can be used to clean the cooler tubes, providing the cooler tubes are flushed with clean automatic transmission fluid and blown dry with shop air. Use only clean automatic transmission fluid designated for the transmission and torque converter being serviced.

GENERAL SPECIFICATIONS

TORQUE SPECIFICATIONS

DescriptionNm
Air cleaner bolt11
Air cleaner outlet pipe clamp5
Battery tray bolts9
Transmission fluid cooler thermal bypass valve nuts9
Transmission fluid cooler tube bolts9
Transmission fluid cooler tube fittings25

TORQUE SPECIFICATIONS