Home ReviewsRefund
Home/Mazda/RX-8/Mazda RX-8 I рестайлинг (2008-2012)/Repair manual/Mechanical/Engine - Intake-Air System [1.3L]: Other
Contents Section: Mechanical All sections

Engine - Intake-Air System [1.3L]: Other Mazda RX-8 I рестайлинг

Mechanical ~353 words

Open Circuit

  1. If there is no continuity, the circuit is open. Repair or replace the wiring harness.
  1. Throttle body terminal A and PCM terminal 2A
  2. Throttle body terminal B and PCM terminal 2B

Short Circuit

  1. If there is no continuity, the circuit is shorted. Repair or replace the wiring harness.
  1. Throttle body terminal A and power supply
  2. Throttle body terminal A and body GND
  3. Throttle body terminal B and power supply
  4. Throttle body terminal B and body GND
  1. If there is no continuity, the circuit is open. Repair or replace the wiring harness.
  1. SSV solenoid valve terminal B and PCM terminal 21
  2. SSV solenoid valve terminal A and main relay terminal C
  1. If there is no continuity, the circuit is shorted. Repair or replace the wiring harness.
  1. SSV solenoid valve terminal B and body GND
  2. SSV solenoid valve terminal A and power supply
  1. If there is no continuity, the circuit is open. Repair or replace the wiring harness.
  1. VFAD solenoid valve terminal B and PCM terminal 1AE
  2. VFAD solenoid valve terminal A and main relay terminal C
  1. If there is no continuity, the circuit is shorted. Repair or replace the wiring harness.
  1. VFAD solenoid valve terminal B and body GND
  2. VFAD solenoid valve terminal A and power supply
  1. If there is no continuity, the circuit is open. Repair or replace the wiring harness.
  1. VDI solenoid valve terminal B and PCM terminal 2L
  2. VDI solenoid valve terminal A and main relay terminal C
  1. If there is no continuity, the circuit is shorted. Repair or replace the wiring harness.
  1. VDI solenoid valve terminal B and body GND
  2. VDI solenoid valve terminal A and power supply
  1. If there is no continuity, the circuit is open. Repair or replace the wiring harness.
  1. APV motor terminal B and PCM terminal 2F
  2. APV motor terminal D and PCM terminal 2D
  1. If there is no continuity, the circuit is shorted. Repair or replace the wiring harness.
  1. APV motor terminal B and power supply
  2. APV motor terminal B and body GND
  3. APV motor terminal D and power supply
  4. APV motor terminal D and body GND

More articles — Engine - Intake-Air System [1.3L]