Front Axle: Overview Mazda MX-5 NB рестайлинг

Scheme 1

Scheme 2

1. Remove the brake caliper component and disc plate.
2. Position a dial indicator against the wheel hub.
3. Push and pull the wheel hub by hand in the axial direction and measure the wheel bearing play.
4. If the bearing play exceeds the specification, inspect and tighten the locknut to the specified torque and retest. Replace the wheel bearing as necessary. Maximum wheel bearing play 0.05 mm {0.002 in}

Scheme 3

Scheme 4

1. Remove the hub bolt using the SSTs.
2. Install the hub bolt into the wheel hub and install a washer and hub nut on the hub bolt using a brass bar.
3. Tighten the hub nut while holding the wheel hub using a brass bar.