Cooling System: Removal & Installation Mazda MX-5 NB рестайлинг

P/S Oil Pump Removal Note

1. Remove the P/S oil pump with the oil hose still connected.
2. Position the P/S oil pump so that it is out of the way.

Scheme 23

1. Install the new rubber seal with the bonding agent.

Scheme 24

1. Verify that the battery is fully charged. (See «BATTERY»(ref-167276-S32150427812004101200000) .)
2. Disconnect the cooling fan motor connector.
3. Connect battery positive voltage and an ammeter to the cooling fan motor connector.
4. Verify that the cooling fan motor operates smoothly at the standard current draw. If not as specified, replace the cooling fan motor. Standard current 4.50-6.49 (A) [12V]

Scheme 25

Scheme 26

1. Remove the cooling fan. (See «RADIATOR REMOVAL/INSTALLATION»(ref-194426-S12031945602005092800000) .)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.