GENERATOR SPECIFICATIONS
| Application | Specification |
|---|
| Brush Length |
| Standard | 0.87" (22 mm) |
| Minimum | 0.24" (6.0 mm) |
| Brush Spring Force |
| Standard | 0.77 lbs. (3.43 N) |
| Minimum | 0.231 lbs. (1.03 N) |
| Generated Current At Terminal B (Reference) |
| At 1000 RPM | (1) 0-65 Amps |
| At 2000 RPM | (1) 0-77 Amps |
| Rotor Resistance | (2) 2.67 Ohms |
| Standard Voltage (3) |
| Terminal B | Battery Voltage |
| Terminal P | About 1 Volt |
| Terminal D | About Zero |
| Voltage (4) |
| Terminal B | 13-15 Volts |
| Terminal P | About 3-8 Volts |
| Terminal D | (5) |
| (1) Must be more than zero amps. (2) Measured between slip rings. (3) Ignition switch in ON position. (4) At idle. (5) Turn headlights, blower motor and rear window defroster on and verify that the voltage reading increases. |
| (1) | Must be more than zero amps. |
| (2) | Measured between slip rings. |
| (3) | Ignition switch in ON position. |
| (5) | Turn headlights, blower motor and rear window defroster on and verify that the voltage reading increases. |
GENERATOR MAXIMUM RATED OUTPUT SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Generator Bracket Mounting Bolts | 28-38 (38-52) |
| Generator Mounting Bolts |
| Upper | 14-18 (19-24) |
| Lower | 28-38 (38-52) |
| INCH Lbs. (N.m) |
| Terminal "B+" Wire Nut | 87-130 (9.9-14.7) |
GENERATOR TORQUE SPECIFICATIONS
Service Specifications
| Application | Classification |
|---|
| All Models | 12V-32AH/5HR |
| Application | INCH Lbs. (N.m) |
|---|
| Battery Box Clamp Bolt | 70-121 (8.9-13.7) |
BATTERY TORQUE SPECIFICATIONS
