GENERATOR SPECIFICATIONS
| Application | Specification |
|---|
| Brush Length |
| Standard | 0.89" (22.5 mm) |
| Minimum | 0.20" (5.0 mm) |
| Brush Spring Force |
| Standard | 0.92 lbs. (4.1-5.3 N) |
| Minimum | 0.38 lbs. (1.7 N) |
| Generated Current (Reference) |
| At 1000 RPM | (1) 0-90 Amps |
| At 2000 RPM | (1) 0-105 Amps |
| Rotor Resistance (2) | 2.5-2.9 Ohms |
| Standard Voltage |
| Ignition Switch ON |
| Terminal B | Battery Voltage |
| Terminal P | About 1 Volt |
| Terminal D | About Zero Volt |
| At Idle (3) |
| Terminal B | 13-15 Volts |
| Terminal P | About 3-8 Volts |
| Terminal D | (4) |
| (1) Must be greater than zero amps. (2) Measure between slip rings. (3) 68°F (20°C). (4) Turn on the following electrical loads: headlights, blower motor and rear defroster and verify voltage increases. |
| (1) | Must be greater than zero amps. |
| (2) | Measure between slip rings. |
| (4) | Turn on the following electrical loads: headlights, blower motor and rear defroster and verify voltage increases. |
Service Specifications
| Application | Classification |
|---|
| MPV | 12V-48AH/5HR MF Or 12V-55AH/5HR MF |
Torque Specifications
| Application | INCH Lbs. (N.m) |
|---|
| Battery Box Clamp Nut | 35-60 (4.0-6.8) |
| Battery Tray Mounting Bolts/Nuts | 70-104 (7.9-11.7) |
BATTERY TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Generator Bracket Mounting Bolts | 32-45 (43-61) |
| Generator Mounting Bolts | 29-41 (40-55) |
| INCH Lbs. (N.m) |
| Terminal "B+" Wire Nut | 87-130 (9.9-14.7) |
GENERATOR TORQUE SPECIFICATIONS
