Canister Drain Cut Valve
Remove Canister Drain Cut Valve (CDCV). See CANISTER DRAIN CUT VALVE LOCATIONS table. Blow air into CDCV port "A". (Scheme 76) Air should flow from port "B". Using fused jumper wires, apply battery voltage to CDCV terminals. Blow air into port "A". Air should not flow from port "B". If CDCV does not operate as specified, replace CDCV.
| Application | Location |
|---|---|
| Miata | To Right Of Canister |
| Millenia | Rear Of Fuel Tank |
| Protege | Near Fuel Filler |
| 626 | Rear Of Fuel Tank |
CANISTER DRAIN CUT VALVE LOCATIONS
Scheme 76
Remove Canister Drain Cut Valve (CDCV), located behind air filter. Apply air pressure to CDCV port "A". (Scheme 76) Air should flow from port "B". Using fused jumper wires, apply battery voltage to CDCV terminals. Apply air pressure to port "A". Air should not flow from port "B". If CDCV does not operate as specified, replace CDCV.