Home/Mazda/CX-7/Mazda CX-7 I рестайлинг (2009-2012)/Repair manual/Ignition System/Ignition System [L5]: Removal & Installation

Contents

Section: Ignition System

All sections

Ignition System [L5]: Removal & Installation Mazda CX-7 I рестайлинг

Ignition System

SPARK PLUG REMOVAL/INSTALLATION [L5]

CAUTION

If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.

Disconnect the negative battery cable.
Remove the plug hole plate. (See «PLUG HOLE PLATE REMOVAL/INSTALLATION [L5]»(ref-375350-S23041993352010102800000) .)
Remove the ignition coils. (See «IGNITION COIL REMOVAL/INSTALLATION [L5]»(ref-375356-S41201870082010102800000) .)
Remove the spark plugs using a plug-wrench.
Install in the reverse order of removal. Tightening torque 10-14 N.m {1.1-1.4 kgf.m, 8.0-10 ft.lbf}