Home/Mazda/CX-7/Mazda CX-7 I рестайлинг (2009-2012)/Repair manual/Ignition System/Ignition System [L3 with Tc]: Removal & Installation

Contents

Section: Ignition System

All sections

Ignition System [L3 with Tc]: Removal & Installation Mazda CX-7 I рестайлинг

Ignition System

SPARK PLUG REMOVAL/INSTALLATION [L3 WITH TC]

CAUTION

If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.

Disconnect the negative battery cable.
Remove the charge air cooler. (See «INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3 WITH TC]»(ref-375331-S03672667482010102800000) .)
Remove the ignition coils. (See «IGNITION COIL REMOVAL/INSTALLATION [L3 WITH TC]»(ref-375334-S03252830932010102800000) .)
Remove the spark plugs using a plug-wrench.
Install in the reverse order of removal. Tightening torque 10-14 N.m {1.1-1.4 kgf.m, 8.0-10 ft.lbf}