To reassemble, reverse disassembly procedure. Replace any worn or damaged parts.
Installation
To install, reverse removal procedure. Use new seals. See TIMING BELT for alignment and adjustment procedures. Add engine oil.
Removal
Turn crankshaft to TDC on No. 1 cylinder. Drain coolant. Remove fan belt and timing belt upper cover. Remove wheel well splash shield, crankshaft pulley and timing belt lower cover. Remove tensioner and timing belt. Remove water pump inlet pipe. Remove water pump and gasket.
To install, reverse removal procedure. During assembly, apply a coating of vegetable oil to "O" ring. See TIMING BELT installation for alignment and adjustment procedures. Fill cooling system.
Note. For information on cooling system capacities and other cooling system components, see appropriate article in ENGINE COOLING SYSTEMS section.