Brake Lines Disconnection/Connection
| CAUTION | Brake fluid will damage painted surfaces. If brake fluid does get on a painted surface, wipe it off immediately. |
- Tighten the brake pipe flare nut using a commercially available flare nut wrench. Be sure to modify the brake pipe flare nut tightening torque to allow for use of a commercially avaiable flare nut wrench. (See «TORQUE FORMULAS»(ref-288792-S32520539262008062500000) ).
- If any brake line has been disconnected anytime during the procedure, add brake fluid, bleed the brakes, and inspect for leakage after the procedure has been completed.
