Interior Trim: Other Mazda 6 GH

Without rear spoiler

Scheme 54

1. Pull the liftgate upper trim on the side edges towards you, then disengage pins A from the body.
2. Pull the middle section of the trim towards you and disengage clips B and pin C from the body.
3. Remove the liftgate upper trim.
4. Install in the reverse order of removal.

Scheme 55

1. Pull the liftgate upper trim toward you, then disengage the pin A, C and clip B from the body.
2. Remove the liftgate upper trim.
3. Install in the reverse order of removal.

Scheme 56

Scheme 57

1. Remove the liftgate upper trim. (See «LIFTGATE UPPER TRIM REMOVAL/INSTALLATION [5-DOOR, SPORT WAGON]»(ref-288737-S22650426662008062500000) )
2. Position the strap hanger as shown in the figure.
3. Pull the liftgate side trim toward you, then disengage clips A, pin B and the strap hanger from the body and pin B, hook C, D from the liftgate lower trim.
4. Remove the liftgate side trim.
5. Remove the hanger strap from the liftgate side trim.
6. Install in the reverse order of removal.

Scheme 58

1. Remove the liftgate upper trim. (See «LIFTGATE UPPER TRIM REMOVAL/INSTALLATION [5-DOOR, SPORT WAGON]»(ref-288737-S22650426662008062500000) )
2. Remove the fastener.
3. Pull the liftgate side trim toward you, then disengage the clips A and hook B, C from the body.
4. Remove the liftgate side trim.
5. Install in the reverse order of removal.

Scheme 59

1. Remove the liftgate upper trim. (See «LIFTGATE UPPER TRIM REMOVAL/INSTALLATION [5-DOOR, SPORT WAGON]»(ref-288737-S22650426662008062500000) )
2. Remove the liftgate side trim. (See «LIFTGATE SIDE TRIM REMOVAL/INSTALLATION [5-DOOR, SPORT WAGON]»(ref-288737-S19540356892008062500000) )
3. Pull the handle toward you, then remove the handle.
4. Pull the liftgate lower trim toward you, then disengage clips A, B and pins C, D from the body.
5. Remove the liftgate lower trim.
6. Install in the reverse order of removal.

Scheme 60

Scheme 61

1. Remove the liftgate upper trim. (See «LIFTGATE UPPER TRIM REMOVAL/INSTALLATION [5-DOOR, SPORT WAGON]»(ref-288737-S22650426662008062500000) )
2. Remove the liftgate side trim. (See «LIFTGATE SIDE TRIM REMOVAL/INSTALLATION [5-DOOR, SPORT WAGON]»(ref-288737-S19540356892008062500000) )
3. Pull the handle toward you, then remove it.
4. Pull the liftgate lower trim toward you, then disengage the clips A and pins B, C from the body.
5. Remove the liftgate lower trim.
6. Install in the reverse order of removal.

Scheme 62

1. Pull the handle outward, then remove the handle.
2. Remove the fasteners, then remove the trunk lid trim.
3. Install in the reverse order of removal.

Scheme 63

Scheme 64

1. Insert a screwdriver into the assist handle notch and remove the assist handle cover.
2. Pull the assist handle outward, then remove the assist handle.
3. Install in the reverse order of removal.

Scheme 65

Scheme 66

1. Remove the screw, then the sunvisor.
2. Disconnect the vanity mirror illumination connector.
3. Disengage the center adapter (sunvisor stopper) from the body using a fastener remover.
4. Install in the reverse order of removal.