Technical Data (Transaxle): Other — Mazda 6 GH (2007-2009)

Technical Data (Transaxle): Other Mazda 6 GH

CLUTCH

Item	Specification
Specified fluid	SAE J1703, FMVSS 116 DOT-3
Clutch pedal height (Reference Value)	210-216 mm {8.27-8.50 in}
Clutch pedal free play	1.0-3.0 mm {0.04-0.11 in}
Clutch pedal push rod free play	0.1-0.5 mm {0.004-0.020 in} (Reference value)
Clutch pedal disengagement stroke	Minimum: 20 mm {0.79 in} (Reference value)
Clutch pedal stroke	140 mm {5.51 in} (Reference value)
Clutch cover diaphragm spring fingers maximum depth [G35M-R, A65M-R]	0.6 mm {0.024 in} max.
Maximum clearance of flatness of the pressure plate [G35M-R, A65M-R]	0.3 mm {0.012 in} max.
Clutch cover diaphragm spring fingers maximum misalignment [G35M-R, A65M-R]	0.6 mm {0.024 in} max.
Clutch cover diaphragm spring fingers maximum depth [A26MX-R]	0.6 mm {0.024 in}
Maximum clearance of flatness of the pressure plate [A26MX-R]	0.3 mm {0.012 in}
Clutch cover diaphragm spring fingers maximum misalignment [A26MX-R]	1.0 mm {0.039 in}
Minimum clutch disc thickness	0.3 mm {0.012 in}
Maximum clutch disc runout	0.7 mm {0.028 in}
Flywheel runout limit [G35M-R]	0.1 mm {0.004 in}
Flywheel runout limit [A65M-R]	0.05 mm {0.002 in}
Dual-mass flywheel maximum runout	1.5 mm {0.059 in}

CLUTCH SPECIFICATION

Item	Specification
Manual transaxle oil [G35M-R]	Specified oil grade: API Service GL-4 or GL-5 Specified oil viscosity (All-season): SAE 75W-90 Specified oil viscosity (Above 10 °C {50 °F}): SAE 80W-90 Capacity (approximate quantity): 2.87 L {3.03 US qt, 2.53 Imp qt}
Manual transaxle oil [A65M-R]	Specified oil grade: API Service GL-4 or GL-5 Specified oil viscosity: SAE 75W-90 Capacity (approximate quantity): 2.3 L {2.4 US qt, 2.0 Imp qt}
Manual transaxle oil [A26MX-R]	Specified oil grade: API Service GL-4 or GL-5 Specified oil viscosity: SAE 75W-90 Capacity (approximate quantity): 2.55 L {2.69 US qt, 2.24 Imp qt}

MANUAL TRANSAXLE SPECIFICATION

Item	Specification
Average time lag	N position-->D range: 0.4-0.7 sec. N position-->R position: 0.4-0.7 sec.
ATF type	ATF M-V
Capacity (approx. quantity)	8.14 L {8.6 US qt, 7.2 Imp qt}
Input/turbine speed sensor resistance	250-600 ohms (ATF temperature: -40-160 °C {-40-320 °F})
Intermediate sensor voltage	4.5-5.5 V
Vehicle speed sensor (VSS) voltage	4.5-5.5 V

AUTOMATIC TRANSAXLE (FS5A-EL) SPECIFICATION

Position/range	Engine stall speed (RPM)
D, M(1GR, 2GR)	2,200-2,800
R	2,200-2,800

ENGINE STALL SPEED SPECIFICATION

TRANSAXLE RANGE (TR) SWITCH RESISTANCE SPECIFICATION

Item					Engine
Item					AJ
Automatic transaxle type					AW6A-EL
ATF	Type				JWS3309
ATF	Capacity (Approx. quantity) : (L {US qt, Imp qt})				7.0 {7.4, 6.2}
Line pressure		D, M range		Idle	372-432 {3.8-4.4, 54-62}
	(kPa {kgf/cm 2 , psi})	R position		Idle	580-670 {6.0-6.8, 85-97}
Engine stall speed : (RPM)		D, M range			2,480
Engine stall speed : (RPM)		R position			2,480
Time lag : (s)		N position --> D range			1 or less
Time lag : (s)		N position --> R position			1.5 or less
Transaxle fluid temperature (TFT) sensor (kilohm)		ATF temperature: 10 °C {50 °F}			5.62-7.31
		ATF temperature: 25 °C {77 °F}			3.5
		ATF temperature: 110 °C {230 °F}			0.22-0.27
Input/turbine speed sensor (mA)		Signal		High	12.0-16.0
Input/turbine speed sensor (mA)		Signal		Low	4.0-8.0
Solenoid valves : (ohm)		ATF temperature: 20 °C {68 °F}	Shift solenoid A		11-15
			Shift solenoid B		11-15
			Shift solenoid C		5.0-5.6
			Shift solenoid D		5.0-5.6
			Shift solenoid E		5.0-5.6
			Shift solenoid F		5.0-5.6
			TCC control solenoid		5.0-5.6
			Line pressure control solenoid		5.0-5.6

AUTOMATIC TRANSAXLE (AW6A-EL) SPECIFICATION